Coverart for item
The Resource Energy and environment engineering and management : selected, peer reviewed papers from the 3rd International Congress of Energy and Environment Engineering and Management, Portalegre, Portugal, 25th to 27th November 2009, edited by Paulo Sérgio Duque de Brito and José Gañán Gómez

Energy and environment engineering and management : selected, peer reviewed papers from the 3rd International Congress of Energy and Environment Engineering and Management, Portalegre, Portugal, 25th to 27th November 2009, edited by Paulo Sérgio Duque de Brito and José Gañán Gómez

Label
Energy and environment engineering and management : selected, peer reviewed papers from the 3rd International Congress of Energy and Environment Engineering and Management, Portalegre, Portugal, 25th to 27th November 2009
Title
Energy and environment engineering and management
Title remainder
selected, peer reviewed papers from the 3rd International Congress of Energy and Environment Engineering and Management, Portalegre, Portugal, 25th to 27th November 2009
Statement of responsibility
edited by Paulo Sérgio Duque de Brito and José Gañán Gómez
Creator
Contributor
Subject
Genre
Language
eng
Summary
This collection comprises selected papers from the 3 rd International Congress on Energy and Environment Engineering and Management. Each Congress provides an opportunity for academics, scientific consultants and companies to share days of interaction that permit the free interchange of experience and, at the same time, create and renew links between different work-groups. This Congress included a total of six thematic areas, covering a broad spectrum within the applications associated with environmental engineering, energy installations, renewable energy, electromechanics, materials and project engineering. The contents therefore provide a handy introduction to the subject. These 23 selected, peer-reviewed papers originally were presented during the 3rd International Congress of Energy and Environment Engineering and Management held in Portalegre, Portugal, in November 2009. The 63 contributors address a wide variety of topics, including: sustainable manufacturing in the aerospace industry, surface wave energy capture systems, interface potential modeling in a finite crystal, ecological design in projects engineering, and computer simulation and depth profiling of light nuclei by nuclear techniques. Editors are de Brito (Portalagre Polytechnic Institute, Portugal) and Gómez (Extremadura U. Spain)
Member of
Cataloging source
N$T
Dewey number
333.7
Illustrations
illustrations
Index
index present
LC call number
TD195.E49
LC item number
I56 2009eb
Literary form
non fiction
http://bibfra.me/vocab/lite/meetingDate
2009
http://bibfra.me/vocab/lite/meetingName
International Congress of Energy and Environment Engineering and Management
Nature of contents
  • dictionaries
  • bibliography
http://library.link/vocab/relatedWorkOrContributorName
  • Brito, Paulo Sérgio Duque de
  • Gañán Gomez, Jose
Series statement
Advanced materials research,
Series volume
v. 107
http://library.link/vocab/subjectName
  • Energy development
  • Environmental engineering
  • BUSINESS & ECONOMICS
  • BUSINESS & ECONOMICS
  • NATURE
  • Energy development
  • Environmental engineering
Label
Energy and environment engineering and management : selected, peer reviewed papers from the 3rd International Congress of Energy and Environment Engineering and Management, Portalegre, Portugal, 25th to 27th November 2009, edited by Paulo Sérgio Duque de Brito and José Gañán Gómez
Instantiates
Publication
Copyright
Antecedent source
unknown
Bibliography note
Includes bibliographical references and index
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
Activated carbons prepared from natural and synthetic raw materials with potential applications in gas separations -- Sustainable manufacturing in aerospace industry : analysis of the viability of intermediate stages elimination in sheet processing -- Low environmental impact machining processes of composite materials applied to the aerospace sector -- Sand mining pool eutrophication (Vale do Paraiba, São Paulo, Brazil) : preliminary assessment -- Recovery of degraded areas in Vale do Paraiba, São Paulo, Brazil : performance indicators -- Surface wave energy capture system (a new proposition) -- Environmental education and energetic efficiency : reports on Brazilian projects in the sake of socio-environmental sustainability -- Free cooling with phase change materials (PCM) -- Interface potential modeling in a finite crystal -- Hydrothermal stability of ordered mesoporous titanosilicate materials prepared at room temperature -- Composites in the design optimization of biconvex refractive solar concentrators, study and calculation prototypes -- SOM-SEM-EDS identification of tool wear mechanisms in the dry-machining of aerospace titanium alloys -- Ecological design, an objective in the projects engineering area -- Use of centrifugal pumps operating as turbines for energy recovery in water distribution networks. Two case study -- Leds, toward the best energy efficiency in lighting -- Comparison of simple illuminance model performances under clear-sky conditions for Athens (Greece) -- Study of thermal conductivity of materials made of sludges water depuration of the brewing industry -- Treatment of urban waste water sludges by means of his appraisement for incorporation in ceramic matrix -- Preliminary study of the influence of machining conditions in the response to corrosion of UNS-A92024 alloy -- Computer simulation and depth profiling of light nuclei by nuclear techniques -- Environmental, energetic and economic analysis about the energy source for a vehicle with typical Portuguese urban use -- Identification, analysis and evolution of the mechanisms of wear for secondary adhesion for dry turning processes of Al-Cu alloys -- Radiation safety of old uranium mining waste dumps in Portugal -- Environmental remediation and the legacy of uranium mining waste in Portugal and Europe, lessons to retain
Control code
823170585
Dimensions
unknown
Extent
1 online resource (xiv, 164 pages)
File format
unknown
Form of item
online
Isbn
9783038134091
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
c
Other physical details
illustrations.
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
(OCoLC)823170585
Label
Energy and environment engineering and management : selected, peer reviewed papers from the 3rd International Congress of Energy and Environment Engineering and Management, Portalegre, Portugal, 25th to 27th November 2009, edited by Paulo Sérgio Duque de Brito and José Gañán Gómez
Publication
Copyright
Antecedent source
unknown
Bibliography note
Includes bibliographical references and index
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
Activated carbons prepared from natural and synthetic raw materials with potential applications in gas separations -- Sustainable manufacturing in aerospace industry : analysis of the viability of intermediate stages elimination in sheet processing -- Low environmental impact machining processes of composite materials applied to the aerospace sector -- Sand mining pool eutrophication (Vale do Paraiba, São Paulo, Brazil) : preliminary assessment -- Recovery of degraded areas in Vale do Paraiba, São Paulo, Brazil : performance indicators -- Surface wave energy capture system (a new proposition) -- Environmental education and energetic efficiency : reports on Brazilian projects in the sake of socio-environmental sustainability -- Free cooling with phase change materials (PCM) -- Interface potential modeling in a finite crystal -- Hydrothermal stability of ordered mesoporous titanosilicate materials prepared at room temperature -- Composites in the design optimization of biconvex refractive solar concentrators, study and calculation prototypes -- SOM-SEM-EDS identification of tool wear mechanisms in the dry-machining of aerospace titanium alloys -- Ecological design, an objective in the projects engineering area -- Use of centrifugal pumps operating as turbines for energy recovery in water distribution networks. Two case study -- Leds, toward the best energy efficiency in lighting -- Comparison of simple illuminance model performances under clear-sky conditions for Athens (Greece) -- Study of thermal conductivity of materials made of sludges water depuration of the brewing industry -- Treatment of urban waste water sludges by means of his appraisement for incorporation in ceramic matrix -- Preliminary study of the influence of machining conditions in the response to corrosion of UNS-A92024 alloy -- Computer simulation and depth profiling of light nuclei by nuclear techniques -- Environmental, energetic and economic analysis about the energy source for a vehicle with typical Portuguese urban use -- Identification, analysis and evolution of the mechanisms of wear for secondary adhesion for dry turning processes of Al-Cu alloys -- Radiation safety of old uranium mining waste dumps in Portugal -- Environmental remediation and the legacy of uranium mining waste in Portugal and Europe, lessons to retain
Control code
823170585
Dimensions
unknown
Extent
1 online resource (xiv, 164 pages)
File format
unknown
Form of item
online
Isbn
9783038134091
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
c
Other physical details
illustrations.
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
(OCoLC)823170585

Library Locations

    • Ellis LibraryBorrow it
      1020 Lowry Street, Columbia, MO, 65201, US
      38.944491 -92.326012
    • Engineering Library & Technology CommonsBorrow it
      W2001 Lafferre Hall, Columbia, MO, 65211, US
      38.946102 -92.330125
Processing Feedback ...