Borrow it
Coverart for item
The Resource Organ printing, Dong-Woo Cho, Jung-Seob Lee, Jinah Jang, Jin Woo Jung and Jeong Hun Park, Falguni Pati

Organ printing, Dong-Woo Cho, Jung-Seob Lee, Jinah Jang, Jin Woo Jung and Jeong Hun Park, Falguni Pati

Creator
Author
Contributor
Summary
This book introduces various 3D printing systems, biomaterials, and cells for organ printing. In view of the latest applications of several 3D printing systems, their advantages and disadvantages are also discussed. A basic understanding of the entire spectrum of organ printing provides pragmatic insight into the mechanisms, methods, and applications of this discipline. Organ printing is being applied in the tissue engineering field with the purpose of developing tissue/organ constructs for the regeneration of both hard (bone, cartilage, osteochondral) and soft tissues (heart). There are other potential application areas including tissue/organ models, disease/cancer models, and models for physiology and pathology, where in vitro 3D multicellular structures developed by organ printing are valuable
Language
eng
Work
Publication
Extent
1 online resource (1 volume (various pagings))
Note
  • "Version: 20151001"--Title page verso
  • "A Morgan & Claypool publication as part of IOP Concise Physics"--Title page verso
  • Title from PDF title page (viewed on November 1, 2015)
Contents
  • Preface -- Acknowledgements -- Author biography -- 1. Introduction
  • 2. Stereolithography-based 3D printing -- 2.1. System configurations -- 2.2. Photo-polymerization
  • 3. Inkjet-based 3D printing -- 3.1. Inkjet printing technology -- 3.2. 3D inkjet printing technology -- 3.3. 3D inkjet printing technique for creating 3D functional tissue/organ constructs -- 3.4. Conclusion
  • 4. Dispensing-based 3D printing -- 4.1. System configurations -- 4.2. Organ printing based on dispensing
  • 5. 3D printing software -- 5.1. Computer-aided scaffold architecture design -- 5.2. Automated printing path generation -- 5.3. Conclusion
  • 6. Biomaterials for organ printing -- 7. Natural, synthetic and semi-synthetic polymers -- 7.1. Natural polymers -- 7.2. Synthetic and semi-synthetic polymers
  • 8. Decellularized extracellular matrix (dECM) -- 8.1. Preparation of decellularized ECM bioinks -- 8.2. Properties of decellularized ECM bioinks -- 8.3. Significant progress for 3D printing application
  • 9. Tissue engineering: bone -- 10. Tissue engineering: cartilage (nose, ear and trachea) -- 10.1. 3D printing for cartilage tissue regeneration -- 10.2. Conclusion
  • 11. Tissue engineering: osteochondral tissue -- 12. Tissue engineering: soft tissue (the heart--cardiac muscle, cardiovascular tissue and heart valves) -- 12.1. Ischemic cardiac diseases -- 12.2. Heart valve -- 12.3. Coronary arteries
  • 13. In vitro tissue/organ models -- 14. Future work -- 14.1. Conclusions
Isbn
9781681740799
Instance
Label
Organ printing
Title
Organ printing
Statement of responsibility
Dong-Woo Cho, Jung-Seob Lee, Jinah Jang, Jin Woo Jung and Jeong Hun Park, Falguni Pati
Creator
Contributor
Author
Publisher
Subject
Language
eng
Summary
This book introduces various 3D printing systems, biomaterials, and cells for organ printing. In view of the latest applications of several 3D printing systems, their advantages and disadvantages are also discussed. A basic understanding of the entire spectrum of organ printing provides pragmatic insight into the mechanisms, methods, and applications of this discipline. Organ printing is being applied in the tissue engineering field with the purpose of developing tissue/organ constructs for the regeneration of both hard (bone, cartilage, osteochondral) and soft tissues (heart). There are other potential application areas including tissue/organ models, disease/cancer models, and models for physiology and pathology, where in vitro 3D multicellular structures developed by organ printing are valuable
Member of
Biographical or historical data
Professor Dong-Woo Cho received his PhD in Mechanical Engineering from the University of Wisconsin-Madison in 1986. Since then he has been a professor of the Department of Mechanical Engineering at the Pohang University of Science and Technology. He is director of the Center for Rapid Prototyping-based 3D Tissue/Organ printing. His research interests include 3D microfabrication based on 3D printing technology, its application to tissue engineering, and more generally to bio-related fabrication. He has recently focused on tissue/organ printing technology and the development of high-performance bioinks. He has received several prestigious awards in these academic areas. He serves or has served on the editorial boards of several international journals. Professor Cho has published over 210 academic papers in various international journals in the field of manufacturing and tissue engineering, and has contributed chapters to ten books related to tissue engineering and organ printing. Jung-Seob Lee is an Integrated MS/PhD student in the Department of Mechanical Engineering at Pohang University of Science and Technology (POSTECH). He received his BS at the Department of Mechanical Engineering at Busan University in 2010. His research interests is the development and improvement of 3D printing systems and its application to the regeneration of large volume composite tissue with complex shapes. His current research is to develop a 3D printed ear and to regenerate auricular cartilage for microtia patients. Professor Falguni Pati is an Assistant Professor in the Department of Biomedical Engineering at IIT Hyderabad, India. He received his ME in Biomedical Engineering from Jadavpur University, India and completed his PhD in Bioengineering from IIT Kharagpur, India. He was a Postdoctoral Fellow at Intelligent Manufacturing Systems Lab, POSTECH, South Korea from 2011 to 2014 and in the Division of Nanobiotechnology at the Royal Institute of Technology (KTH) from 2014 to 2015. His research interests include 3D bioprinting, tissue/organ models, novel bioinks, and tissue engineering. He has published 15 peer reviewed journal articles and four book chapters. He has also applied for two patents with his co-workers. Jin Woo Jung is an Integrated MS/PhD student in the Department of Mechanical Engineering at Pohang University of Science and Technology (POSTECH). He received his BS at the Department of Mechanical Engineering, Hanyang University in 2009. His research interests are the development and improvement of 3D printing and its CAD/CAM technology. His current research is in 3D printing-based clinical applications, such as the reconstruction of a new nose for an arhinia patient, reconstruction of depressed malar region, and development of customized augmentation rhinoplasty using 3D printing systems. Jinah Jang is a postdoctoral fellow in the Department of Mechanical Engineering at Pohang University of Science and Technology (POSTECH). She received her BSc(Eng) in Mechanical Design and Automation Engineering at Seoul National University of Technology in 2010 and her PhD in the Division of Integrative Biosciences and Biotechnology at POSTECH in 2015. Her current research interests are to develop the functional tissue-derived decellularized extracellular matrix (dECM) bioinks for 3D bioprinting of tissue analogues. In particular, she applies this technology to both regenerative medicine and in vitro tissue modeling for cardiovascular disease. She has received several awards including excellent presentation, excellent publication and young investigator presentation awards in 2014-2015. Jeong Hun Park is a postdoctoral fellow in the Department of Mechanical Engineering at Pohang University of Science and Technology (POSTECH), Korea from 2015. He received his BS and ME in Precision Mechanical Engineering at Chungbuk National University, and completed his PhD in Mechanical Engineering at POSTECH. His current research interests are the development of 3D printing systems, 3D printing of target-specific functional scaffolds using various biomaterials, and the building of 3D tissue/organ constructs for tissue regeneration.
Cataloging source
CaBNVSL
http://library.link/vocab/creatorName
Cho, Dong Woo
Dewey number
610.28
Illustrations
illustrations
Index
no index present
LC call number
R857.T55
LC item number
C566 2015eb
Literary form
non fiction
Nature of contents
  • dictionaries
  • bibliography
http://library.link/vocab/relatedWorkOrContributorName
  • Lee, Jung-Seob
  • Jang, Jinah
  • Jung, Jin Woo
  • Park, Jeong Hun
  • Pati, Falguni
  • Morgan & Claypool Publishers
  • Institute of Physics (Great Britain)
Series statement
IOP concise physics,
http://library.link/vocab/subjectName
  • Tissue engineering
  • Three-dimensional printing
  • Tissue Engineering
  • Biomedical Engineering
  • TECHNOLOGY & ENGINEERING
  • Three-dimensional printing
  • Tissue engineering
Target audience
adult
Label
Organ printing, Dong-Woo Cho, Jung-Seob Lee, Jinah Jang, Jin Woo Jung and Jeong Hun Park, Falguni Pati
Instantiates
Publication
Distribution
Note
  • "Version: 20151001"--Title page verso
  • "A Morgan & Claypool publication as part of IOP Concise Physics"--Title page verso
  • Title from PDF title page (viewed on November 1, 2015)
Bibliography note
Includes bibliographical references
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Preface -- Acknowledgements -- Author biography -- 1. Introduction
  • 2. Stereolithography-based 3D printing -- 2.1. System configurations -- 2.2. Photo-polymerization
  • 3. Inkjet-based 3D printing -- 3.1. Inkjet printing technology -- 3.2. 3D inkjet printing technology -- 3.3. 3D inkjet printing technique for creating 3D functional tissue/organ constructs -- 3.4. Conclusion
  • 4. Dispensing-based 3D printing -- 4.1. System configurations -- 4.2. Organ printing based on dispensing
  • 5. 3D printing software -- 5.1. Computer-aided scaffold architecture design -- 5.2. Automated printing path generation -- 5.3. Conclusion
  • 6. Biomaterials for organ printing -- 7. Natural, synthetic and semi-synthetic polymers -- 7.1. Natural polymers -- 7.2. Synthetic and semi-synthetic polymers
  • 8. Decellularized extracellular matrix (dECM) -- 8.1. Preparation of decellularized ECM bioinks -- 8.2. Properties of decellularized ECM bioinks -- 8.3. Significant progress for 3D printing application
  • 9. Tissue engineering: bone -- 10. Tissue engineering: cartilage (nose, ear and trachea) -- 10.1. 3D printing for cartilage tissue regeneration -- 10.2. Conclusion
  • 11. Tissue engineering: osteochondral tissue -- 12. Tissue engineering: soft tissue (the heart--cardiac muscle, cardiovascular tissue and heart valves) -- 12.1. Ischemic cardiac diseases -- 12.2. Heart valve -- 12.3. Coronary arteries
  • 13. In vitro tissue/organ models -- 14. Future work -- 14.1. Conclusions
Control code
928531742
Dimensions
unknown
Extent
1 online resource (1 volume (various pagings))
File format
multiple file formats
Form of item
online
Isbn
9781681740799
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Other control number
10.1088/978-1-6817-4079-9
Other physical details
illustrations (some color).
Reformatting quality
access
Specific material designation
remote
System control number
(OCoLC)928531742
Label
Organ printing, Dong-Woo Cho, Jung-Seob Lee, Jinah Jang, Jin Woo Jung and Jeong Hun Park, Falguni Pati
Publication
Distribution
Note
  • "Version: 20151001"--Title page verso
  • "A Morgan & Claypool publication as part of IOP Concise Physics"--Title page verso
  • Title from PDF title page (viewed on November 1, 2015)
Bibliography note
Includes bibliographical references
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Preface -- Acknowledgements -- Author biography -- 1. Introduction
  • 2. Stereolithography-based 3D printing -- 2.1. System configurations -- 2.2. Photo-polymerization
  • 3. Inkjet-based 3D printing -- 3.1. Inkjet printing technology -- 3.2. 3D inkjet printing technology -- 3.3. 3D inkjet printing technique for creating 3D functional tissue/organ constructs -- 3.4. Conclusion
  • 4. Dispensing-based 3D printing -- 4.1. System configurations -- 4.2. Organ printing based on dispensing
  • 5. 3D printing software -- 5.1. Computer-aided scaffold architecture design -- 5.2. Automated printing path generation -- 5.3. Conclusion
  • 6. Biomaterials for organ printing -- 7. Natural, synthetic and semi-synthetic polymers -- 7.1. Natural polymers -- 7.2. Synthetic and semi-synthetic polymers
  • 8. Decellularized extracellular matrix (dECM) -- 8.1. Preparation of decellularized ECM bioinks -- 8.2. Properties of decellularized ECM bioinks -- 8.3. Significant progress for 3D printing application
  • 9. Tissue engineering: bone -- 10. Tissue engineering: cartilage (nose, ear and trachea) -- 10.1. 3D printing for cartilage tissue regeneration -- 10.2. Conclusion
  • 11. Tissue engineering: osteochondral tissue -- 12. Tissue engineering: soft tissue (the heart--cardiac muscle, cardiovascular tissue and heart valves) -- 12.1. Ischemic cardiac diseases -- 12.2. Heart valve -- 12.3. Coronary arteries
  • 13. In vitro tissue/organ models -- 14. Future work -- 14.1. Conclusions
Control code
928531742
Dimensions
unknown
Extent
1 online resource (1 volume (various pagings))
File format
multiple file formats
Form of item
online
Isbn
9781681740799
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Other control number
10.1088/978-1-6817-4079-9
Other physical details
illustrations (some color).
Reformatting quality
access
Specific material designation
remote
System control number
(OCoLC)928531742

Subject

Member of

Library Locations

    • Ellis LibraryBorrow it
      1020 Lowry Street, Columbia, MO, 65201, US
      38.944491 -92.326012

Library Links

Structured data from the Bibframe namespace is licensed under the Creative Commons Attribution 4.0 International License by University of Missouri Libraries. Additional terms may apply to data associated with third party namespaces.
Processing Feedback ...