Coverart for item
The Resource Testing and evaluation of inorganic materials IV : selected, peer reviewed papers from the Fourth Annual Meeting on Testing and Evaluation of Inorganic Materials, June 7-9, 2013, Guilin, China, edited by Yiwang Bao, Danyu Jiang and Jianghong Gong

Testing and evaluation of inorganic materials IV : selected, peer reviewed papers from the Fourth Annual Meeting on Testing and Evaluation of Inorganic Materials, June 7-9, 2013, Guilin, China, edited by Yiwang Bao, Danyu Jiang and Jianghong Gong

Label
Testing and evaluation of inorganic materials IV : selected, peer reviewed papers from the Fourth Annual Meeting on Testing and Evaluation of Inorganic Materials, June 7-9, 2013, Guilin, China
Title
Testing and evaluation of inorganic materials IV
Title remainder
selected, peer reviewed papers from the Fourth Annual Meeting on Testing and Evaluation of Inorganic Materials, June 7-9, 2013, Guilin, China
Statement of responsibility
edited by Yiwang Bao, Danyu Jiang and Jianghong Gong
Title variation
  • Fourth Meeting on Testing and Evaluation of Inorganic Materials
  • Meeting on Testing and Evaluation of Inorganic Materials
Creator
Contributor
Editor
Subject
Genre
Language
eng
Summary
Collection of selected, peer reviewed papers from the Fourth Annual Meeting on Testing and Evaluation of Inorganic Materials, June 7-9, 2013, Guilin, China. The 77 papers are grouped as follows: Chapter 1: Chemical Composition and Microstructure; Chapter 2: Mechanical and Physical Properties; Chapter 3: Testing Techniques and Devices. The meeting focused on the mechanical, chemical, and physical properties and the microstructure of ceramics, glass, and concrete and on techniques for testing such properties. The 77 papers include discussions of the microstructure and chemical composition of bor
Member of
Cataloging source
E7B
Dewey number
620.110287
Illustrations
  • illustrations
  • charts
Index
index present
LC call number
TA410
LC item number
.M44 2013eb
Literary form
non fiction
http://bibfra.me/vocab/lite/meetingDate
2013
http://bibfra.me/vocab/lite/meetingName
Meeting on Testing and Evaluation of Inorganic Materials
Nature of contents
  • dictionaries
  • bibliography
http://library.link/vocab/relatedWorkOrContributorName
  • Bao, Yiwang
  • Jiang, Danyu
  • Gong, Jianghong
Series statement
Key engineering materials,
Series volume
volume 591
http://library.link/vocab/subjectName
  • Materials
  • Ceramics
  • Glass
  • Concrete
  • TECHNOLOGY & ENGINEERING
  • TECHNOLOGY & ENGINEERING
  • Ceramics
  • Concrete
  • Glass
  • Materials
Label
Testing and evaluation of inorganic materials IV : selected, peer reviewed papers from the Fourth Annual Meeting on Testing and Evaluation of Inorganic Materials, June 7-9, 2013, Guilin, China, edited by Yiwang Bao, Danyu Jiang and Jianghong Gong
Instantiates
Publication
Copyright
Bibliography note
Includes bibliographical references and indexes
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Testing and Evaluation of Inorganic Materials IV; Preface; Table of Contents; Chapter 1: Chemical Composition and Microstructure; Determination of Oxygen Content in Pervoskite-Type Cathode Coatings; Raman Spectroscopy Study of YSZ Co-Doped with CeO2/Gd2O3; Fourier Transformation Infrared Spectrum Characteristics of Synthetic Zeolite A; Microstructure and Chemical Composition of Boron Nitride Fibers; Characterization and Thermal Decomposition Process of ZrC Ceramic Organic Precursor; Rheological Property of Intercalated Modification Clay
  • Preparation and Characterization of SiO2 Nano/Submicron-Rods by Catalytic Pyrolysis of a Polymer PrecursorPreparation and Development of Bioglass by Sol-Gel Method; Study on Na2O-B2O3-SiO2-CaO-P2O5-F System Glass-Ceramics; Pore Structure Analysis on Hardened Paste of CaO-Al2O3-P2O5 Cement; Pore Structure and Microstructure of Super Light-Weight Foam Concrete Reinforced by Inorganic Fiber; Effect of WO3 Doping on Microstructural and Electrical Properties of ZnO-Pr6O11 Based Varistor Materials
  • Influence of Process Parameters on Surface Morphology of Ceramic Layer Prepared by Micro Arc Oxidation on Aluminum Alloy 6061Preparation and Characterization of ZrO2 Coating by Sol-Gel on Mullite Short Fiber; Low Sintering Temperature for Li-, Sb-, and Ta- Modified (K, Na)NbO3-Based Ceramics from Nanopowders; Spark Plasma Sintered WC-Ni Cemented Carbides with Various Contents of ZrC Nano-Powder; Composition Modification and Mechanical Properties of Solidified TiB2-Based Ceramic Prepared by Combustion Synthesis in Ultra-High Gravity Field
  • Microstructures and Properties of TiC-TiB2 Composites Prepared by Combustion Synthesis in Enhanced High-Gravity FieldMicrostructure and Fracture Behavior of the Joint of Solidified TiB2 Ceramic with Ti-6Al-4V Achieved by Reaction Fusion Bonding in Ultrahigh-Gravity Field; Effect of N2 Flow Rate on Structure and Mechanical Properties of CrN Coatings Prepared by Closed Field Unbalanced Magnetron Sputtering; Influence of Substrate Temperature and Bias Voltage on Structure and Mechanical Properties of CrN Coatings; Large Remanent Polarization of Pm2O3-Doped Bi4Ti3O12 Films
  • Research Progress in Bioactive Glasses for Implant MaterialsEffect of Two Kinds of Rare Earth Oxides on Zirconia Restoration; Microstructure and Properties of Resin-Based Pyrocarbon with Micro-Nano Structure Carbon and TiO2 as Additives; Effect of Oxidant on the Leaching Rate of Indium from Water Quenching Slag; Fabrication of Nano Zeolite P from Coal Fly Ash by Combining Alkaline -- Fusion and Hydrothermal Reactions; Preparation of Geopolymer Using Electrolytic Manganese Residue; Characterization of MCM-41 Mesoporous Silica Supported 2-Carboxyethyl Phenyl Phosphinic Acid
Control code
865825096
Dimensions
unknown
Extent
1 online resource (366 pages)
Form of item
online
Isbn
9783038262992
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Other physical details
illustrations (some color)
Specific material designation
remote
System control number
(OCoLC)865825096
Label
Testing and evaluation of inorganic materials IV : selected, peer reviewed papers from the Fourth Annual Meeting on Testing and Evaluation of Inorganic Materials, June 7-9, 2013, Guilin, China, edited by Yiwang Bao, Danyu Jiang and Jianghong Gong
Publication
Copyright
Bibliography note
Includes bibliographical references and indexes
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Testing and Evaluation of Inorganic Materials IV; Preface; Table of Contents; Chapter 1: Chemical Composition and Microstructure; Determination of Oxygen Content in Pervoskite-Type Cathode Coatings; Raman Spectroscopy Study of YSZ Co-Doped with CeO2/Gd2O3; Fourier Transformation Infrared Spectrum Characteristics of Synthetic Zeolite A; Microstructure and Chemical Composition of Boron Nitride Fibers; Characterization and Thermal Decomposition Process of ZrC Ceramic Organic Precursor; Rheological Property of Intercalated Modification Clay
  • Preparation and Characterization of SiO2 Nano/Submicron-Rods by Catalytic Pyrolysis of a Polymer PrecursorPreparation and Development of Bioglass by Sol-Gel Method; Study on Na2O-B2O3-SiO2-CaO-P2O5-F System Glass-Ceramics; Pore Structure Analysis on Hardened Paste of CaO-Al2O3-P2O5 Cement; Pore Structure and Microstructure of Super Light-Weight Foam Concrete Reinforced by Inorganic Fiber; Effect of WO3 Doping on Microstructural and Electrical Properties of ZnO-Pr6O11 Based Varistor Materials
  • Influence of Process Parameters on Surface Morphology of Ceramic Layer Prepared by Micro Arc Oxidation on Aluminum Alloy 6061Preparation and Characterization of ZrO2 Coating by Sol-Gel on Mullite Short Fiber; Low Sintering Temperature for Li-, Sb-, and Ta- Modified (K, Na)NbO3-Based Ceramics from Nanopowders; Spark Plasma Sintered WC-Ni Cemented Carbides with Various Contents of ZrC Nano-Powder; Composition Modification and Mechanical Properties of Solidified TiB2-Based Ceramic Prepared by Combustion Synthesis in Ultra-High Gravity Field
  • Microstructures and Properties of TiC-TiB2 Composites Prepared by Combustion Synthesis in Enhanced High-Gravity FieldMicrostructure and Fracture Behavior of the Joint of Solidified TiB2 Ceramic with Ti-6Al-4V Achieved by Reaction Fusion Bonding in Ultrahigh-Gravity Field; Effect of N2 Flow Rate on Structure and Mechanical Properties of CrN Coatings Prepared by Closed Field Unbalanced Magnetron Sputtering; Influence of Substrate Temperature and Bias Voltage on Structure and Mechanical Properties of CrN Coatings; Large Remanent Polarization of Pm2O3-Doped Bi4Ti3O12 Films
  • Research Progress in Bioactive Glasses for Implant MaterialsEffect of Two Kinds of Rare Earth Oxides on Zirconia Restoration; Microstructure and Properties of Resin-Based Pyrocarbon with Micro-Nano Structure Carbon and TiO2 as Additives; Effect of Oxidant on the Leaching Rate of Indium from Water Quenching Slag; Fabrication of Nano Zeolite P from Coal Fly Ash by Combining Alkaline -- Fusion and Hydrothermal Reactions; Preparation of Geopolymer Using Electrolytic Manganese Residue; Characterization of MCM-41 Mesoporous Silica Supported 2-Carboxyethyl Phenyl Phosphinic Acid
Control code
865825096
Dimensions
unknown
Extent
1 online resource (366 pages)
Form of item
online
Isbn
9783038262992
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Other physical details
illustrations (some color)
Specific material designation
remote
System control number
(OCoLC)865825096

Library Locations

    • Ellis LibraryBorrow it
      1020 Lowry Street, Columbia, MO, 65201, US
      38.944491 -92.326012
    • Engineering Library & Technology CommonsBorrow it
      W2001 Lafferre Hall, Columbia, MO, 65211, US
      38.946102 -92.330125
Processing Feedback ...