IEEE-SA Standards Board
Resource Information
The organization IEEE-SA Standards Board represents an institution, an association, or corporate body that is associated with resources found in University of Missouri Libraries.
The Resource
IEEE-SA Standards Board
Resource Information
The organization IEEE-SA Standards Board represents an institution, an association, or corporate body that is associated with resources found in University of Missouri Libraries.
- Label
- IEEE-SA Standards Board
A sample of Items by the Organization IEEE-SA Standards Board See All
Context
Context of IEEE-SA Standards BoardContributor of
No resources found
No enriched resources found
- Adoption of ISO/IEC 15288:2002 systems engineering : system life cycle processes
- Amendment to IEEE standard techniques for high-voltage testing
- American National Standard dictionary of electromagnetic compatibility (EMC) including Electromagnetic Environmental Effects (E3)
- American National Standard for evaluating the image quality of X-ray computed tomography (CT) security-screening systems
- American National Standard for metric practice
- American National Standard for use of the International System of Units (SI) : the modern metric system
- American National Standard methods of measurement of compatibility between wireless communications devices and hearing aids
- American National Standard performance criteria for backpack-based radiation-detection systems used for Homeland Security
- American national standard : requirements for power-line carrier line traps
- American national standard for electromagnetic compatibility : radiated emission measurements in electromagnetic interference (EMI) control--calibration of antennas (9 kHz to 40 GHz)
- American national standard for radiation protection instrumentation test and calibration, air monitoring instruments
- American national standard guide for electromagnetic compatibility : computations and treatment of measurement uncertainty
- American national standard methods of measurement of the electromagnetic and operational compatibility of unlicensed personal communications services (UPCS) devices
- American national standard, specification and performance of on-site instrumentation for continuously monitoring radioactivity in effluents
- Artificial intelligence exchange and service tie to all test environments (AI-ESTATE)
- Behavioural languages, Part 1-1, VHDL language reference manual
- Behavioural languages, Part 4, Verilog hardware description language
- Behavioural languages, Part 5, VITAL ASIC (application specific integrated circuit) modeling specification
- Delay and power calculation standards, Part 3, Standard delay format (SDF) for the electronic design process
- Design and verification of low-power integrated circuits
- Guide for computer-based control for hydroelectric power plant automation
- Guide for implementing IEEE Std 1512 using a systems engineering process
- Health informatics : personal health device communication, Part 00103, Overview
- Health informatics : personal health device communication, Part 10406, Device specialization--basic electrocardiograph (ECG) (1- to 3-lead ECG)
- Health informatics : personal health device communication, Part 10417, Device specialization--glucose meter
- Health informatics : personal health device communication, Part 10418, Device specialization--international normalized ratio (INR) monitor
- Health informatics : personal health device communication, Part 10421, Device specialization, peak expiratory flow monitor (peak flow)
- Health informatics : personal health device communication, Part 10425, Device specialization-- continuous glucose monitor (CGM)
- Health informatics : personal health device communication, Part 10441: device specialization, Cardiovascular fitness and activity monitor
- Health informatics : personal health device communication, Part 20601, Application profile-- optimized exchange protocol
- Health informatics : point-of-care medical device communication, Part 00103, Nomenclature--implantable device, cardiac
- Health informatics : point-of-care medical device communication, Part 20101, Application profiles-- base standard
- Health informatics : point-of-care medical device communication, Part 30200, Transport profile-- cable connected
- Health informatics : point-of-care medical device communication, Part 30300, Transport profile-- infrared wireless
- Health informatics- Personal health device communication, Part 10419, Device specialization- insulin pump
- Health informatics-- Personal health device communication, Part 10417, Device specialization-- glucose meter
- Health informatics-- Personal health device communication, Part 10424, Device Specialization--Sleep Apnoea Breathing Therapy Equipment (SABTE)
- Health informatics--point-of-care medical device communication, Part 10102, Nomenclature--annotated ECG
- Health informatics--point-of-care medical device communication, Part 30400, Interface profile--cabled ethernet
- High voltage switchgear and controlgear, Part 111 ; overhead, pad-mounted, dry vault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
- IEEE Guide for the interpretation of gases generated in silicone-immersed transformers
- IEEE Guide for the planning, design, installation, and repair of submarine power cable systems
- IEEE Guide--adoption of ISO/IEC TR 24748-2:2011 : systems and software engineering : life cycle management, Part 2, Guide to the application of ISO/IEC 15288 (system life cycle processes)
- IEEE Recommended practice for measurement and limits of voltage fluctuations and associated light flicker on AC power systems
- IEEE Standard Test Interface Language (STIL) for digital test vector data
- IEEE Standard VHDL analog and mixed-signal extensions
- IEEE Standard for functional modeling language : syntax and semantics for IDEFO
- IEEE Standard for local and metropolitan area networks--station and media access control connectivity discovery, Corrigendum 1, Technical and editorial corrections
- IEEE Standard for medical device communications : transport profile-- IrDA based-- cable connected
- IEEE Standard for medical device communications : transport profile-- connection mode-- amendment 1 : corrections and clarifications
- IEEE adoption of smart energy profile 2.0 application protocol standard
- IEEE application guide for AC high-voltage circuit breakers rated on a symmetrical current basis
- IEEE application guide for capacitance current switching for AC high-voltage circuit breakers
- IEEE application guide for capacitance current switching for AC high-voltage circuit breakers rated on a symmetrical current basis
- IEEE application guide for transient recovery voltage for AC high-voltage circuit breakers
- IEEE design guide for electric power service systems for generating stations
- IEEE guide : adoption of IEC/TR 61000-3-7:2008, electromagnetic compatibility (EMC) : limits : assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems
- IEEE guide adoption of PMI standard : a guide to the project management body of knowledge
- IEEE guide adoption of PMI standard : a guide to the project management body of knowledge
- IEEE guide for Wireless Access in Vehicular Environments (WAVE) architecture
- IEEE guide for abnormal frequency protection for power generating plants
- IEEE guide for accelerated aging tests for medium-voltage (5 kV-35 kV) extruded electric power cables using water-filled tanks
- IEEE guide for acceptance and maintenance of insulating oil in equipment
- IEEE guide for acceptance and maintenance of insulating oil in equipment
- IEEE guide for acceptance and maintenance of natural ester fluids in transformers
- IEEE guide for adoption of ISO/IEC TR 14471:2007 information technology--software engineering--guidelines for the adoption of CASE tools
- IEEE guide for aeolian vibration field measurements of overhead conductors
- IEEE guide for application for monitoring equipment to liquid-immersed transformers and components
- IEEE guide for application of composite insulators
- IEEE guide for application of composite line post insulators
- IEEE guide for application of digital line current differential relays using digital communication
- IEEE guide for application of power electronics for power quality improvement on distribution systems rated 1 kV through 38 kV
- IEEE guide for array and battery sizing in stand-alone photovoltaic (PV) systems
- IEEE guide for assessing, monitoring, and mitigating aging effects on class 1E equipment used in nuclear power generating stations--corrigendum 1: thermal aging model corrections
- IEEE guide for assessing, monitoring, and mitigating aging effects on electrical equipment used in nuclear power generating stations and other nuclear facilities
- IEEE guide for automatic reclosing of circuit breakers for AC distribution and transmission lines
- IEEE guide for automatic reclosing of line circuit breakers for AC distribution and transmission lines
- IEEE guide for breaker failure protection of power circuit breakers
- IEEE guide for bus design in air insulated substations
- IEEE guide for cable connections for gas-insulated substations
- IEEE guide for cable connections for gas-insulated substations
- IEEE guide for cleaning insulators
- IEEE guide for collecting and managing transmission line inspection and maintenance data
- IEEE guide for collecting, categorizing, and utilizing information related to electric power distribution interruption events
- IEEE guide for conducting distribution impact studies for distributed resource interconnection
- IEEE guide for containment and control of oil spills in substations
- IEEE guide for containment and control of oil spills in substations
- IEEE guide for control architecture for high power electronics (1 MW and greater) used in electric power transmission and distribution systems
- IEEE guide for control of small (100 kVA to 5 MVA) hydroelectric power plants
- IEEE guide for design of substation rigid-bus structures
- IEEE guide for design, operation, and integration of distributed resource island systems with electric power systems
- IEEE guide for detection, mitigation, and control of concentric neutral corrosion in medium-voltage underground cables
- IEEE guide for determination of hottest-spot temperature in dry-type transformers
- IEEE guide for determination of hottest-spot temperature in dry-type transformers
- IEEE guide for determination of maximum winding temperature rise in liquid-filled transformers
- IEEE guide for determining fault location on AC transmission and distribution lines
- IEEE guide for determining the effects of high-temperature operation on conductors, connectors, and accessories
- IEEE guide for diagnostic field testing of electric power apparatus : electrical machinery
- IEEE guide for diagnostic field testing of fluid-filled power transformers, regulators, and reactors
- IEEE guide for differential and polarizing relay circuit testing
- IEEE guide for digital test interchange format (DTIF) application
- IEEE guide for dissolved gas analysis in transformer load tap changers
- IEEE guide for electric power distribution reliability indices
- IEEE guide for electric power distribution reliability indices
- IEEE guide for electric power distribution reliability indices
- IEEE guide for electric power substation physical and electronic security
- IEEE guide for evaluating the effect of solar radiation on outdoor metal-enclosed switchgear
- IEEE guide for fault-locating techniques on shielded power cable systems
- IEEE guide for field testing and evaluation of the insulation of shielded power cable systems rated 5 kV and above
- IEEE guide for field testing of laminated dielectric, shielded power cable systems rated 5 kV and above with high direct current voltage
- IEEE guide for field testing of relaying current transformers
- IEEE guide for field testing of shielded power cable systems using very low frequency (VLF)
- IEEE guide for field testing of shielded power cable systems using very low frequency (VLF) (less than 1 Hz)
- IEEE guide for functional evaluation of insulation systems for AC electric machines rated 2300 V and above
- IEEE guide for generator ground protection
- IEEE guide for grounding of instrument transformer secondary circuits and cases
- IEEE guide for human factors applications of computerized operating procedure systems (COPS) at nuclear power generating stations and other nuclear facilities
- IEEE guide for improving the lightning performance of electric power overhead distribution lines
- IEEE guide for improving the lightning performance of electric power overhead distribution lines
- IEEE guide for in-service use, care, maintenance, and testing of conductive clothing for use on voltages up to 765 kV AC and +/-750 kV DC
- IEEE guide for in-service use, care, maintenance, and testing of conductive clothing for use on voltages up to 765kV ac and +/- 750kV dc
- IEEE guide for induction machinery maintenance testing and failure analysis
- IEEE guide for information technology-- : system definition-- concept of operations (ConOps) document
- IEEE guide for inspection of overhead transmission line construction
- IEEE guide for installation methods for fiber-optic cables in electric power generating stations and in industrial facilities
- IEEE guide for installation, inspection, and testing for class 1E power, instrumentation, and control equipment at nuclear facilities
- IEEE guide for instrumentation and control equipment grounding in generating stations
- IEEE guide for interpretation of gases generated in natural ester and synthetic ester-immersed transformers
- IEEE guide for investigating and analyzing power cable, joint, and termination failures on systems rated 5 kV through 46 kV
- IEEE guide for investigation, analysis, and reporting of power circuit breaker failures
- IEEE guide for loading mineral-oil-immersed transformers
- IEEE guide for loading mineral-oil-immersed transformers : corrigendum 1
- IEEE guide for maintenance methods on energized power lines
- IEEE guide for measurement of environmental sensitivities of standard frequency generators
- IEEE guide for measurements of electromagnetic properties of earth media
- IEEE guide for methods of power factor measurement for low-voltage inductive test circuits
- IEEE guide for methods of power-factor measurement for low-voltage (1000 V AC or lower) inductive test circuits
- IEEE guide for metric conversion of transformer standards
- IEEE guide for monitoring, information exchange, and control of distributed resources interconnected with electric power systems
- IEEE guide for motor control centers rated up to and including 600 V AC or 1000 V DC with recommendations intended to help reduce electrical hazards
- IEEE guide for on-site acceptance tests of electrical equipment and system commissioning of 1000 kV AC and above
- IEEE guide for online monitoring of large synchronous generators (10 MVA and Above)
- IEEE guide for operation and maintenance of turbine generators
- IEEE guide for optimizing the performance and life of lead-acid batteries in remote hybrid power systems
- IEEE guide for paralleling regulating transformers
- IEEE guide for partial discharge testing of shielded power cable systems in a field environment
- IEEE guide for performing arc-flash hazard calculations : amendment 1
- IEEE guide for phasor data concentrator requirements for power system protection, control, and monitoring
- IEEE guide for planning and designing transition facilities between overhead and underground transmission lines
- IEEE guide for power system protective relay applications of audio tones over voice grade channels
- IEEE guide for power system protective relay applications over digital communication channels
- IEEE guide for power-line carrier applications
- IEEE guide for power-line carrier applications, Corrigendum 1, Modal analysis power equation correction
- IEEE guide for preparation techniques of extruded dielectric, shielded cables rated 2.5 kV through 46 kV and the installation of mating accessories
- IEEE guide for protecting power transformers
- IEEE guide for protective grounding of power lines
- IEEE guide for protective relay applications to distribution lines
- IEEE guide for protective relay applications to power transformers
- IEEE guide for protective relaying of utility-consumer interconnections
- IEEE guide for rail transit traction power systems modeling
- IEEE guide for recommended electrical clearances and insulation levels in air-insulated electrical power substations
- IEEE guide for reducing bird-related outages
- IEEE guide for safety in the installation of mobile substation equipment
- IEEE guide for selecting and testing jackets for power, instrumentation, and control cables
- IEEE guide for selecting, charging, testing, and evaluating lead-acid batteries used in stand-alone photovoltaic (PV) systems
- IEEE guide for selection and design of aluminum sheaths for power cables
- IEEE guide for selection and use of battery monitoring equipment in stationary applications
- IEEE guide for selection and use of battery monitoring equipment in stationary applications
- IEEE guide for selection of valve-regulated lead-acid (VRLA) batteries for stationary applications
- IEEE guide for selection, charging, test, and evalution of lead-acid batteries used in stand-alone photovoltaic (PV) systems
- IEEE guide for slip and pull-out strength testing of bolted dead end strain clamps
- IEEE guide for smart grid interoperability of energy technology and information technology operation with the electric power system (EPS), end-use applications and loads
- IEEE guide for specifying and selecting power, control, and special-purpose cable for petroleum and chemical plants
- IEEE guide for static var compensator field tests
- IEEE guide for substation fire protection
- IEEE guide for sulphur hexafluoride (SF6) gas handling for high-voltage (over 1000 Vac) equipment
- IEEE guide for switchgear : unit substation--requirements
- IEEE guide for synchronization, calibration, testing, and installation of phasor measurement units (PMUs) for power system protection and control
- IEEE guide for synchronous generator modeling practices and applications in power system stability analyses
- IEEE guide for temperature monitoring of cable systems
- IEEE guide for temporary protective grounding systems used in substations
- IEEE guide for temporary protective grounding systems used in substations
- IEEE guide for terrestrial photovoltaic power system safety
- IEEE guide for test and evaluation of lead-acid batteries used in photovoltaic (PV) hybrid systems
- IEEE guide for test methods and procedures to evaluate the electrical performance of insulators in freezing conditions
- IEEE guide for test procedures for synchronous machines, Part I | Part II, Acceptance and performance testing | Test procedures and parameter determination for dynamic analysis
- IEEE guide for testing medium-voltage metal-enclosed switchgear for internal arcing faults
- IEEE guide for testing metal-enclosed switchgear rated up to 38 kV for internal arcing faults
- IEEE guide for testing metal-enclosed switchgear rated up to 38 kV for internal arcing faults, Corrigendum 1
- IEEE guide for testing the electrical, mechanical, and durability performance of wildlife protective devices on overhead power distribution systems rated up to 38 kV
- IEEE guide for testing turn insulation of form-wound stator coils for alternating-current electric machines
- IEEE guide for the application and interpretation of frequency response analysis for oil-immersed transformers
- IEEE guide for the application of AC adjustable-speed drives on 2400 to 13800 V auxiliary systems in electric power generating stations
- IEEE guide for the application of Rogowski coils used for protective relaying purposes
- IEEE guide for the application of component surge-protective devices for use in low-voltage [equal to or less than 1000 V (ac) or 1200 V (dc)] circuits
- IEEE guide for the application of current transformers used for protective relaying purposes, Corrigendum 1, Corrections to equation 18 and equation 19
- IEEE guide for the application of electric motors in class I, division 2 and class I, zone 2 hazardous (classified) locations
- IEEE guide for the application of gas-insulated substations 1 kV to 52 kV
- IEEE guide for the application of insulation coordination
- IEEE guide for the application of metal-oxide surge arresters for alternating-current systems, Amendment 1, Supplement to consider energy handling capabilities
- IEEE guide for the application of protective relays used for abnormal frequency load shedding and restoration
- IEEE guide for the application of separable insulated connectors
- IEEE guide for the application of surge protectors used in low-voltage (equal to or less than 1000 Vrms or 1200 Vdc) data, communications, and signaling circuits
- IEEE guide for the application of surge voltage protective equipment on AC rotating machinery 1000 V and greater
- IEEE guide for the application of surge voltage protective equipment on AC rotating machinery 1000 V and greater, Corrigendum 1: correct table 2, A.1, and A.2
- IEEE guide for the application of surge-protective devices for low-voltage (1000 V or Less) AC power circuits
- IEEE guide for the application of transient recovery voltage for AC high-voltage circuit breakers
- IEEE guide for the application of turbine governing systems for hydroelectric generating units
- IEEE guide for the application, maintenance, and evaluation of room temperature vulcanizing (RTV) silicone rubber coatings for outdoor ceramic insulators
- IEEE guide for the application, operation, and coordination of high-voltage (]1000 V) current-limiting fuses
- IEEE guide for the application, operation, and maintenance of high-voltage fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories
- IEEE guide for the application, specification, and testing of phase-shifting transformers
- IEEE guide for the application, specification, and testing of phase-shifting transformers
- IEEE guide for the definition of reliability program plans for nuclear power generating stations
- IEEE guide for the design of cable raceway systems for electric generating facilities
- IEEE guide for the design, construction, and operation of electric power substations for community acceptance and environmental compatibility
- IEEE guide for the detection and location of acoustic emissions from partial discharges in oil-immersed power transformers and reactors
- IEEE guide for the evaluation and reconditioning of liquid immersed power transformers
- IEEE guide for the evaluation of solvents used for cleaning electrical cables and accessories
- IEEE guide for the evaluation of the remaining life of impregnated paper-insulated transmission cable systems
- IEEE guide for the functional specification of fixed-series capacitor banks for transmission system applications
- IEEE guide for the functional specification of medium voltage (1 kV-35 kV) electronic shunt devices for dynamic voltage compensation
- IEEE guide for the functional specification of medium voltage (1-35 kV) electronic series devices for compensation of voltage fluctuations
- IEEE guide for the functional specification of transmission static var compensators
- IEEE guide for the functional specification of transmission static var compensators
- IEEE guide for the implementation of inductive coordination mitigation techniques and applications, Corrigendum 1
- IEEE guide for the installation of vertical generators and generator/motors for hydroelectric applications
- IEEE guide for the interoperability of energy storage systems integrated with the electric power infrastructure
- IEEE guide for the operation, classification, application, and coordination of current-limiting fuses with rated voltages 1-38 kV
- IEEE guide for the preparation of a transmission line design criteria document
- IEEE guide for the preparation of excitation system specifications
- IEEE guide for the protection of communication installations from lightning effects
- IEEE guide for the protection of network transformers
- IEEE guide for the protection of shunt capacitor banks
- IEEE guide for the protection of shunt capacitor banks
- IEEE guide for the protection of shunt reactors
- IEEE guide for the selection, testing, application, and installation of cables having radial-moisture barriers and/or longitudinal water blocking
- IEEE guide for the specification of scope and deliverable requirements for an arc-flash hazard calculation study in accordance with IEEE Std 1584
- IEEE guide for the statistical analysis of electrical insulation breakdown data
- IEEE guide for the statistical analysis of electrical insulation breakdown data
- IEEE guide for the statistical analysis of thermal life test data
- IEEE guide for the transportation of transformers and reactors rated 10 000 kVA or higher
- IEEE guide for the use of IEEE Std 1641, IEEE Standard for signal and test definition
- IEEE guide for the use of IEEE Std 1641, standard for signal and test definition
- IEEE guide for the use of artificial intelligence exchange and service tie to all test environments (AI-ESTATE)
- IEEE guide for transformer impulse tests
- IEEE guide for voltage regulation and reactive power compensation at 1000 kV AC and above
- IEEE guide for voltage sag indices
- IEEE guide for working procedures on underground transmission circuits with induced voltage
- IEEE guide for working procedures on underground transmission circuits with induced voltage, Corrigendum 1
- IEEE guide on interactions between power system disturbances and surge-protective devices
- IEEE guide on shielding practice for low voltage cables
- IEEE guide on the surge environment in low-voltage (1000 V and less) AC power circuits
- IEEE guide to select terminations for shielded alternating-current power cable rated 5 kV - 46 kV
- IEEE guide to the installation of overhead transmission line conductors
- IEEE guide to the use of ATLAS specification
- IEEE guide--adoption of ISO/IEC TR 24474:2010 : systems and software engineering : life cycle management : guidelines for process description
- IEEE guide--adoption of ISO/IEC TR 24748-3:2011 : systems and software engineering : life cycle management, Part 3, Guide to the application of ISO/IEC 12207 (software life cycle processes)
- IEEE health informatics--personal health device communication, Part 10420, Device specialization--body composition analyzer
- IEEE recommended practice for 1 kV to 35 kV medium-voltage DC power systems on ships
- IEEE recommended practice for CASE tool interconnection : characterization of interconnections
- IEEE recommended practice for architectural description of software-intensive systems
- IEEE recommended practice for auxiliary devices for rotating electrical machines in class I, division 2 and zone 2 locations
- IEEE recommended practice for calculating short-circuit currents in industrial and commercial power systems