#
Dissertations, Academic -- University of Missouri--Columbia -- Mechanical engineering
Resource Information
The concept ** Dissertations, Academic -- University of Missouri--Columbia -- Mechanical engineering** represents the subject, aboutness, idea or notion of resources found in **University of Missouri Libraries**.

The Resource
Dissertations, Academic -- University of Missouri--Columbia -- Mechanical engineering
Resource Information

The concept

**Dissertations, Academic -- University of Missouri--Columbia -- Mechanical engineering**represents the subject, aboutness, idea or notion of resources found in**University of Missouri Libraries**.- Label
- Dissertations, Academic -- University of Missouri--Columbia -- Mechanical engineering

## Context

Context of Dissertations, Academic -- University of Missouri--Columbia -- Mechanical engineering#### Subject of

No resources found

No enriched resources found

- Word recognition using optimized coefficients
- 3-dimensional mechanism design and optimization
- A comparison between the plastic work energy criterion and the J-Integral fracture criterion in fatigue crack propagation
- A computer aided design feasibility study on the application of quadtree analysis to calculate the overlap constraint related to the two-dimensional part layout problem
- A constrained variational shape optimization method
- A constrained variational shape optimization method
- A holographic interferometry study of an axisymmetric shock-wave/boundary-layer strong interaction flow
- A knowledge base for corrosion prevention
- A magnetically balanced electric arc in a tranverse gas flow
- A photographic analysis of nucleate boiling
- A photographic analysis of nucleate boiling
- A photographic analysis of the film boiling mechanism
- A preliminary study of laser beam degradation resulting from flow induced density fluctuations
- A proposed method for measurement of the twenty-one independent elastic constants of general homogeneous anisotropic materials
- A recommendation for the initial graphic exchange specification, experimental solids proposal
- A research tool for the chronic depulsation of the systemic circulatory system
- A shock thermochemistry computer program
- A shock tube study of SF6 dissociation
- A simulated crushable material
- A statistically based analysis of the effects of frequency and environment on the fatigue characteristics of SA533B-1 steel
- A statistically based analysis of the effects of frequency and environment on the fatigue characteristics of SA533B-1 steel
- A statistically based investigation of microstructural effects on the fatigue properties of titanium and titanium alloys
- A strategy for simulation and optimization of process flowsheets
- A strategy for simulation and optimization of process flowsheets
- A study of heat generated pressure oscillations in a closed end pipe
- A study of heat generated pressure oscillations in a closed end pipe
- A study of parametric instability of eccentrically stiffened rectangular plates
- A study of radiation induced voids and their annealing behavior by small angle neutron scattering
- A study of the hardening mechanisms and microstructural characteristics of an improved dental amalgam
- A study on two multiaxial creep theories
- A technique for respiratory gas analysis
- A theoretical examination of the growth and attenuation of acoustic and entropy waves in ideal MHD generators
- A theoretical study of microwave interaction with a nonuniform ionized shock front
- A thermoacoustical resonance compressor system
- A thesis on mechanical drawing in technical schools
- A three-dimensional model of the compressible sphere theory of liquid structure
- A viscous-viscoelastic creep model
- Acceleration/deceleration testing for diagnostics of spark ignition engines
- Aerosol reactor for production of metal oxide particles
- Air-cooled refrigeration condenser performance
- An adaptive control strategy for industrial robotic systems
- An analysis and design of the plane-surface solar calorimeter of thermoelectric heat metering type
- An analysis of flow induced acoustic resonance in cavities
- An analysis of the induction time in the acetylene oxygen reaction
- An analytical model for an RF heated plasma
- An application of integer and discrete nonlinear optimization in engineering design
- An application of integer/discrete/0-1 programming for nonlinear, conceptual design optimization
- An experimental investigation of the constant-rate diffusion of an aluminum solute into the surface of a copper solvent
- An experimental study of the dynamic characteristics of a composite highway bridge
- An experimental study of thermal-stress yielding in a tube wall due to a temperature gradient
- An interactive computer graphics package for the design of a robotic work cell
- An interactive computer program for force system structural and dimensional synthesis
- An investigation into the energy exchange processes within a nonequilibrium 4 MHz RF helium plasm
- An investigation of a dual rotor internal combustion engine
- An investigation of the dynamic pressure response of flueric transmission lines
- An investigation of the dynamic pressure response of flueric transmission lines
- An investigation of the ignition quality of Diesel fuels at variable engine speeds
- An investigation of the potential freezing problems in dry cooling towers using polyethylene tubing
- An investigation of the skewed boundary-layer flow in a converging channel
- An investigation of the turbulent mixing between two parallel gas streams of different composition and density with a laser doppler velocimeter
- An optical crosscorrelation technique for turbulent density measurements in flames
- An optical lateral control system for vehicles
- Analysis into the effects of four wheel steering on high speed stability
- Analysis of beaded panels
- Analysis of heat transfer modes during a blowdown
- Analysis of stiffened plates using boundary element methods
- Analytical method for determining the net radiant heat exchange to animals
- Analytical treatment of piston motion in a diesel engine
- Application of CAD to closed die axisymmetric forging
- Application of dynamic matrix control method on the recovery area of a pulp and paper mill
- Applications of the boundary element method for structural shape optimization
- Applications of the boundary element method for structural shape optimization
- Applications of the hemi-cube radiosity method
- Applying artificial intelligence techniques to generative process planning systems
- Automated convection soldering
- Automation and jit implementation of the 845 line
- Buckling of composite panels of variable thickness
- Buckling of composite panels of variable thickness
- CGSOPT : a computer graphics pre-and post-processor for structural optimization
- CPLOT : a two and three dimenstional controur plotting software package
- Calculations of transition coefficients and quantum state number densities in a nonequilibrium helium plasma
- Characteristics of the adiabatic flow of freon-12 through a restrictor tube expansion device with the refrigerant entering at saturation conditions
- Characterization of Fretting fatigue damage
- Characterization of fatigue-crack growth rate data
- Characterization of metal damage through infrared technology
- Characterization of particle production by a thermal aerosol reactor
- Characterization of the surface finish of cold forged 6061-T6 aluminum
- Cogeneration as related to phosphorus incineration
- Combustion gas diagnostic techniques using lasers
- Comparison of monotonic and fatigue behavior of IM6 with AS4 graphite fibers reinforced resin matrix composites
- Computer aided process-selection
- Computer-aided material selection of composites
- Construction and calibration of a field emission microscope for the study of the effects of long term vacuum exposure on the fatigue properties of metals
- Contact deformation of annealed steel
- Contribution to the theory of the two phase blowdown phenomenon
- Conversion of an oxygen gas generator to a liquid air plant
- Corrosion assisted fatigue in 2024-T851 aluminum alloy
- Counter-flow jet mixing
- Coupling of analysis and optimization for engineering design problems
- Decomposition for optimal synthesis in a parallel computing environment
- Decomposition for optimal synthesis in a parallel computing environment
- Design and instrumentation of a shock tube
- Design and performance of a detonation driven shock tube
- Design for latitude
- Determination of parameters used for prediction of chemical concentration gradient residual stress in beryllided titanium
- Detonation hydrodynamics for two-phase explosives
- Detonation hydrodynamics for two-phase explosives
- Development of a multiple-specimen, reversed-flexure tester and its application to the testing of titanium sheet
- Development of an inexpensive habitat for underwater scientific research
- Development of interactive structural and dimensional force system synthesis program version ISD-FORSS-IA and survey of industrial applications
- Digital analysis of flame images for a natural gas-fired furnace
- Downstream control of jet attachment switching
- Dynamic mechanism synthesis by a weighted velocity squared minimization
- Dynamic time response synthesis of four bar mechanisms
- Effect of inlet conditions on diffuser performance
- Effects of aging and chemical etching on fatigue behavior of polycarbonate
- Effects of constraint variation on the fatigue growth of surface flaws
- Effects of cyclic J gradient on the applicability of a fatigue crack growth rate - cyclic J relation
- Effects of molding variables, glass-fiber reinforcement and aging on the fatigue behavior of polycarbonate in aqueous and saline environments
- Efficiency analysis of existing cogeneration facilities involving steam turbines
- Energy consumption analysis of cooling tower fan operation
- Environmental effects on the mechanism of fretting fatigue in 7075-T6 aluminum
- Environmental effects on the mechanism of fretting fatique in 7075-T6 aluminum
- Equilibrium composition and thermodynamic property calculation for general hydrocarbon combustion
- Estimates on heat transfer from a conditioned space for average days
- Exhaust system tuning of a two-cycle engine
- Experimental evaluation of spinal fracture stabilization systems : comparison of Luque rectangles, the Kaneda device, and Harrington rods with sublaminar wires
- Experimental free convection from piping in district heating utilidors
- Extending the accurate frequency range of the cardiac catheter pressure measuring system
- Extension of the four-by-four matrix technique to general dynamic systems
- Fatigue and fretting fatigue in polycrystalline copper
- Fatigue and fretting fatigue of polycrystalline copper
- Fatigue crack growth in a radially cracked rotating disk
- Fatigue growth of surface flaws in finite plates
- Fatigue growth of surface flaws in finite plates under two level block loading
- Fatigue life optimization for gear critical actuation systems by load spectrum synthesis and an algorithm for S-N-R curve generation
- Fatigue life optimization for gear critical actuation systems by load spectrum synthesis and an algorithm for S-N-R curve generation
- First ply failure analysis and effect on fatigue life of a Quasi-isotropic A-260 E-galss/epoxy laminate
- Flow across and inside a membrane tube
- Flow modeling for a biological cell sorter using design optimization
- Flow over a rotating body of revolution
- For planar mechanisms a general technique and interactive computer program for force system synthesis
- Force methods of structural analyses for optimization
- Force system structural synthesis of four bar mechanisms
- Force system synthesis for dynamic motion response : including energy loss and bearing force controls
- Force system synthesis for three dimensional mechanisms using optimization and interactive structural and dimensional synthesis techniques
- Force system synthesis to produce a desired time response of mechanisms
- Force system with link cross section synthesis for a 4R-4bar
- Fracture toughness of manganese-zinc ferrites
- Free convection heat transfer to non-Newtonian rheological dilatant fluids from horizontal cylinder
- Free convection in a heat generating porous media in a short cylinder
- Fretting fatigue stress simulation
- HTSP: a knowledge based teaching/solving tool for heat transfer
- Heterogeneous turbulent mixing layer investigations utilizing a 2-D 2-color laser doppler anemometer and a concentration probe
- High temperature surface diffusion of aluminum into copper
- High-rate pressing of powder metal
- In situ stress measurement by neutron diffraction
- Influence of microstructural and load wave form control on fatigue crack growth behavior of precipitation hardening stainless steels
- Interactive computer graphics and numerical optimization based mechanism force system synthesis
- Interfacial tension between metallic surfaces and petroleum oil
- Investigation of the effect of impurities on the strength of dental amalgams
- Investigation of the pressure-flow relationships of blood in the mammalian kidney
- Inward solidification of water in a cylinder : an analytical and experimental study
- J-integral characterization of fatigue crack growth
- Laminar viscous flow in flexible-elastic tubes
- Linear, quasi-one-dimensional time response of nozzles and diffusers
- Local free convection to non-Newtonian fluids from a horizontal, isothermal cylinder
- Macroselective surface configurations for more efficient trapping of solar energy
- Magnetic measurement of percentage martensite
- Maximum manufacturing utilization of numerically controlled machining centers
- Measurement of cutting forces as they relate to a calibrated flank wear
- Measurement of liquid surface tension by the ring method
- Measurements and analyses of nasal and oral airflow during isolated sound productions by normal and cleft palate speakers
- Mechanical testing of dental amalgam
- Metastability in superheated liquid water
- Metering the flow of air and gases by means of through orifices
- Microstructural and environmental effects on fretting fatigue
- Microwave diagnostics of RF heated plasmas
- Modeling and optimization of anaerobic swine waste digestion systems
- Multiaxial creep models for 304 stainless steel
- Multisolid fluidized bed combustion boiler (20 MW) : thermal efficiency, sulfur oxide emissions and limestone utilization during startup
- Neutron diffraction study of WC-CO wire drawing dies
- Nucleate pool boiling of water on arrays of artificial sites in normal and reduced gravity environments
- Numerical method for solving fluid flow and heat transfer equations by design optimization
- Numerical model of partially insulated contained heat generating porous media
- Numerical modeling of a large deformation thermoforming process
- Numerical solution for multiphase diffusion coatings formed during high temperature plating
- Numerical solution for multiphase diffusion coatings formed during high temperature plating
- Numerical studies of blood flow using a Casson model
- Numerically integrated design sensitivities for structural optimization
- On the solution of external laminar free convection to power law fluids
- Operating characteristics of an air cooled refrigeration condenser
- Optimization applications in structural design
- P.C. based metal forming capability
- PAPNUM (Version 2.0) : a finite element modeling and preprocessing system
- PAPNUM (version 3.0) a finite element modeling and preprocessing system
- Performance calculations for steam condensation on horizontal tubes
- Pitting and fatigue crack initiation of 2124-T851 aluminum in 3.5% NaCl solution
- Plastics as heat exchange surfaces
- Polyethylene creep
- Portable circular saw kickback data base and evaluation
- Portable circular saw kickback field and computer model simulations
- Prediction of surface flaw propagation in finite plates
- Pressure and velocity fields in the Sondhauss tube
- Program for optimization of experimental data within a constrained configuration
- Pulsatile viscous flow in flexible-elastic tubes
- Pulsatile viscous flow in flexible-elastic tubes
- Pulsed electrical power generation from magnetically loaded explosives
- Reactive-sputtered CuInSe2 for photovoltaic applications
- Realistic imaging program for computer aided design
- Reduction of shaking forces in a slider crank mechanism
- Relative motion of spheroids at low Reynolds number
- Relative motion of unequal sphere at low Reynolds numbers
- Residual stress and stress relaxation in cemented carbide composites
- Shape optimal design of a CAM profile
- Shape optimization for beam structural design
- Shape optimization for beam structural design
- Similarity parameter for two-stream turbulent jet-mixing region
- Similitude experiment for gravitational collision efficiency of aerosols
- Simulation and optimization of photovoltaic-powered cold-storage systems
- Simulation of electronic circuit board assembly
- Stability analysis of Hall and diagonal conducting wall MHD generators
- Stability and vibration characteristics of skew plates
- Stability of an inverted pendulum
- Start-up transient model for a refrigerant condenser
- Statistical analysis and presentation of fatigue-crack growth data of Ti-6A1-4V alloys and their dependence on microstructure
- Stiffened cylindrical shell parametric instability
- Stiffened cylindrical shell parametric instability
- Strengthening dental amalgams
- Structural and dimensional force system synthesis for one degree-of-freedom planar linkages by using interactive computer graphics
- Structural optimization
- Study of constitutive relations for plasticity and creep
- Surface texture produced by peripheral milling with helical end mills
- Synthesizing 4R-4BAR mechanisms for four prescribed positions of motion generation using computer graphics
- Synthesizing force systems for motion time response, input-output forces and joint force control using interactive graphics and influence coefficients
- TRUGRAPH : a graphics pre-and post-processor for TRUOPT
- Temperature effect on fleuric transmission lines
- The design and text of a high-speed wind-turbine
- The design environment simulator
- The design of a portable circular saw kickback evaluation system
- The effect of crystallographic orientation on fatigue and fretting of copper single crystals
- The effect of environment and frequency on the fatigue behavior of welded pressure vessel steel
- The effect of frequency, environment, and R ratio on the fatigue-crack growth of a nuclear pressure vessel steel
- The effect of hardness and different materials on the fretting fatigue behavior of Ti-6A1-4V
- The effect of ion implantation on fretting fatigue life of Ti-6Al-4V
- The effect of mean stress and R-ratio on the fatigue behavior of turbine alloys
- The effect of microstructure on the fatigue properties of a .40/.50 carbon steel
- The effect of stress ratio, maximum stress, stress amplitude and yield strength of materials on fatigue crack closure of 2024 aluminum and 4130 steel
- The effect of surface roughness on the fretting fatigue behavior of 7475-T61 aluminum
- The effect of turbulence on a chemical reaction in a nitric oxide jet
- The effects of microstructure on the fatigue life of titanium
- The extension of geometric programming to optimal mechanical design
- The farberized surface of nickel base alloys
- The feasibility of thermionic energy converters
- The fracture resistance of experimental alloy and Class U carbon steel wrought railroad wheels
- The influence of the environment on the plastic zone of a propagating fatigue crack tip in aluminum and steel
- The investigation of the approximation method for computing potential flow through cascade
- The occlusion of circular tubes due to freezing of liquids in forced flow
- The parametric response of beam-columns of variable cross-section resting on an elastic foundation
- The parametric response of beam-columns of variable cross-section resting on an elastic foundation
- The prediction of concentration and residual stress due to high temperature electroplating
- The relative role of environment on fretting fatigue of .40/.50 and 1008 carbon steel
- The residual fatigue life of 1020 steel and 7075-T6 aluminum as a function of initial flaw size
- The role of binder deformation mechanisms on mechanical properties WC-Co cemented carbide composites
- The statistical analysis and presentation of fatigue-crack growth rate data
- The terminal emissivity of farberized Chromel-C
- The thermal design of a laminate mold heater
- The turbulent heterogeneous mixing region
- Theory of flexure of orthotropic multi-layer circular sandwich plates
- Theory of flexure of orthotropic multi-layer circular sandwich plates
- Thermal properties of glass batch materials
- Three dimensional evaluation of human spine stabilization methods
- Three dimensional experimental and computer aided techniques for evaluating partial dentures
- Touch sensing object recognition for robotic applications
- Transient analysis of a two-chamber adiabatic blowdown with ideal gases
- Transient mass diffusion through fabric
- Transient natural convection in a fluid saturated heat generating porous media
- Two-dimensional flow in a converging channel
- Variable orifice damper synthesis for four-bar mechanisms
- Velocity biasing in laser anemometry
- Vision sensing object and number recognition for robotic applications
- Vortex chamber interior flows
- Wall and ineritia corrections to the settling velocity of spheroids

## Embed

### Settings

Select options that apply then copy and paste the RDF/HTML data fragment to include in your application

Embed this data in a secure (HTTPS) page:

Layout options:

Include data citation:

<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.missouri.edu/resource/P4fRUlk0yvo/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.missouri.edu/resource/P4fRUlk0yvo/">Dissertations, Academic -- University of Missouri--Columbia -- Mechanical engineering</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.missouri.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.missouri.edu/">University of Missouri Libraries</a></span></span></span></span></div>

Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements

### Preview

## Cite Data - Experimental

### Data Citation of the Concept Dissertations, Academic -- University of Missouri--Columbia -- Mechanical engineering

Copy and paste the following RDF/HTML data fragment to cite this resource

`<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.missouri.edu/resource/P4fRUlk0yvo/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.missouri.edu/resource/P4fRUlk0yvo/">Dissertations, Academic -- University of Missouri--Columbia -- Mechanical engineering</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.missouri.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.missouri.edu/">University of Missouri Libraries</a></span></span></span></span></div>`