Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2011
Resource Information
The event Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2011 represents a publication, printing, distribution, issue, release or production of resources found in University of Missouri Libraries.
The Resource
Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2011
Resource Information
The event Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2011 represents a publication, printing, distribution, issue, release or production of resources found in University of Missouri Libraries.
- Label
- Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2011
- Provider date
- 2011
187 Items that share the ProviderEvent Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2011
Context
Context of Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2011Publication of
No resources found
No enriched resources found
- A CFD analysis of hydrogen leakage during on-pad purge in the ORION/ARES I shared volume, Kumud Ajmani, Daryl A. Edwards
- A bootstrap approach to an affordable exploration program, Richard C. Oeftering
- A high-resolution capability for large-eddy simulation of jet flows, James R. DeBonis
- A hybrid power management (HPM) based vehicle architecture, Dennis J. Eichenberg
- A lunar surface system supportability technology development roadmap, Richard C. Oeftering and Peter M. Struk, Barmac K. Taleghani ; prepared for the Space 2009 Conference and Exposition sponsored by the American Institute of Aeronautics and Astronautics, Pasadena, California, September 14-17, 2009
- A new high-speed, high-cycle, gear-tooth bending fatigue test capability, David B. Stringer ... [and others] ; prepared for the 67th Annual Forum and Technology Display (Forum 67) sponsored by the American Helicopter Society, Virginia Beach, Virginia, May 3-5, 2011
- A risk management architecture for emergency integrated aircraft control, Gregory E. McGlynn [and others], (electronic resource)
- A sensitivity study of commercial aircraft engine response for emergency situations, Jeffrey T. Csank ... [and others]
- A small fission power system for NASA planetary science missions, Lee Mason [and others], (electronic resource)
- A summary of NASA architecture studies utilizing fission surface power technology, Lee S. Mason, David I. Poston
- A three-dimensional Receiver Operator Characteristic surface diagnostic metric, Donald L. Simon ; prepared for the Annual Conference of the Prognostics and Health Management Society (PHM 2010) sponsored by the Prognostics and Health Management Society (PHM Society), Portland, Oregon, October 10-16, 2010
- Acoustic absorption in porous materials, Maria A. Kuczmarski and James C. Johnston
- Active-controlled fluid film based on wave-bearing technology, Florin Dimofte, Robert C. Hendricks
- Advanced networks in motion mobile sensorweb, William D. Ivancic, David H. Stewart
- Advanced stirling converter (ASC-E2) performance testing at NASA Glenn Research Center, Salvatore Oriti and Scott Wilson
- Advanced technology subsonic transport study : N+3 technologies and design concepts, Daniel P. Raymer ... [and others]
- Aerodynamic simulation of ice accretion on airfoils, Andy P. Broeren ... [and others]
- Aeronautical Mobile Airport Communications System (AeroMACS), James M. Budinger, Edward Hall
- An evaluation of performance metrics for high efficiency tube-and-wing aircraft entering service in 2030-2035, H. Douglas Perkins, Jack Wilson, Daniel P. Raymer
- An examination of commercial aviation accidents and incidents related to integrated vehicle health management, Mary S. Reveley ... [and others]
- An experimental investigation of leak rate performance of a subscale candidate elastomer docking space seal, Nicholas G. Garafolo and Christopher C. Daniels
- An experimental study of upward burning over long solid fuels : facility development and comparison, Julie Kleinhenz, Zeng-Guang Yuan, (electronic resource)
- An overview of NASA engine ice-crystal icing research, Harold E. Addy, Jr. and Joseph P. Veres
- Analysis of solar-heated thermal wadis to support extended-duration lunar exploration, R. Balasubramaniam ... [and others]
- Annular MHD physics for turbojet energy bypass, Steven J. Schneider
- Applying web-based tools for research, engineering, and operations, William D. Ivancic
- Assessment of computational fluid dynamics (CFD) models for shock boundary-layer interaction, James R. DeBonis ... [and others] ; prepared for the 28th Applied Aerodynamics Conference sponsored by the American Institute of Aeronautics and Astronautics, Chicago, Illinois, June 28 to July 1, 2010
- Assessment of some atomization models used in spray calculations, M.S. Raju, Dan Bulzan
- Atmospheric and soil carbon and halophytes, Robert C. Hendricks, Dennis M. Bushnell
- Attenuation of scattered thermal energy atomic oxygen, Bruce A. Banks ... [and others] ; prepared for the 10th International Space Conference on Protection of Materials and Structures from the Space Environment (ICPMSE-10J) sponsored by the ITL, MDA, CSA, JAXA, and the Graduate School of Engineering, Kobe University, Bankoku-Shinryokan, Okinawa, Japan, June 12-17, 2011
- Autonomous satellite operations via secure Virtual Mission Operations Center, Eric Miller, Philip E. Paulsen, Michael Pasciuto
- Axisymmetric calculations of a low-boom inlet in a supersonic wind tunnel, Rodrick V. Chima and Stefanie M. Hirt, Robert Reger
- Buckling and vibration of fiber reinforced composite plates with nanofiber reinforced matrices, Christos C. Chamis and Pappu L.N. Murthy, (electronic resource)
- Burner rig with an unattached duct for evaluating the erosion resistance of thermal barrier coatings, Robert A. Miller, Maria A. Kuczmarski, and Dongming Zhu
- C-Band airport surface communications system engineering : initial high-level safety risk assessment and mitigation, Natalie Zelkin and Stephen Henriksen
- C-band airport surface communications system standards development, phase II final report, Edward Hall [and others], (electronic resource)
- COMPASS Final Report : Saturn moons orbiter using Radioisotope Electric Propulsion (REP) : flagship class mission, Steven R. Oleson and Melissa L. McGuire
- COMPASS final report : Enceladus solar electric propulsion stage, Steven R. Oleson and Melissa L. McGuire
- COMPASS final report : Radioisotope Electric Propulsion (REP) centaur orbiter new frontiers mission, Steven R. Oleson and Melissa L. McGuire
- Can water-injected turbomachines provide cost-effective emissions and maintenance reductions?, Robert C. Hendricks ... [and others] ; prepared for the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery sponsored by the International Journal of Rotating Machinery (ISROMAC), Honolulu, Hawaii, February 26-March 2, 2006
- Causal factors and adverse events of aviation accidents and incidents related to integrated vehicle health management, Mary S. Reveley ... [and others]
- Characterization testing of the Teledyne passive breadboard fuel cell powerplant, Patricia Loyselle, Kevin Prokopius
- Collocation and Galerkin time-stepping methods, H.T. Huynh ; prepared for the 19th Computational Fluid Dynamics Conference sponsored by the American Institute of Aeronautics and Astronautics, San Antonio, Texas, June 22-25, 2009
- Comparison of adhesion and retention forces for two candidate docking seal elastomers, Brad D. Hartzler ... [and others]
- Comparison of in-situ, model and ground based in-flight icing severity, Christopher J. Johnston [and others], (electronic resource)
- Compliant turbomachine sealing, R.C. Hendricks ... [and others] ; prepared for the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery sponsored by the International Journal of Rotating Machinery (ISROMAC), Honolulu, Hawaii, February 26-March 2, 2006
- Component-Level Electronic-Assembly Repair (CLEAR) analysis of the Problem Reporting and Corrective Action (PRACA) database of the International Space Station on-orbit electrical systems, Richard C. Oeftering ... [and others]
- Component-Level Electronic-Assembly Repair (CLEAR) operational concept, Richard C. Oeftering ... [and others]
- Component-Level Electronic-Assembly Repair (CLEAR) spacecraft circuit diagnostics by analog and complex signature analysis, Richard C. Oeftering and Raymond P. Wade, Alain Izadnegahdar
- Component-Level Electronic-Assembly Repair (CLEAR) synthetic instrument capabilities assessment and test report, Richard C. Oeftering and Martin A. Bradish
- Component-Level Electronic-Assembly Repair (CLEAR) system architecture, Richard C. Oeftering ... [and others]
- Computational analysis of a low-boom supersonic inlet, Rodrick V. Chima
- Computational assessment of the aerodynamic performance of a variable-speed power turbine for large civil tilt-rotor application, Gerard E. Welch
- Control of fan blade vibrations using piezoelectrics and bi-directional telemetry, Andrew J. Provenza and Carlos R. Morrison
- DBD plasma actuators for flow control in air vehicles and jet engines : simulation of flight conditions in test chambers by density matching, David E. Ashpis, Douglas R. Thurman
- DBD plasma actuators for flow control in air vehicles and jet engines : simulation of flight conditions in test chambers by density matching, David E. Ashpis, Douglas R. Thurman
- Data analysis techniques for a lunar surface navigation system testbed, David Chelmins, O. Scott Sands, and Aaron Swank, (electronic resource)
- Delivery of unmanned aerial vehicle data, William D. Ivancic, Donald V. Sullivan
- Demonstration of multi-Gbps data rates at Ka-band using software-defined modem and broadband high power amplifier for space communications, Rainee N. Simons ... [and others] ; prepared for the International Microwave Symposium for 2011 (IMS2011) sponsored by the Institute of Electrical and Electronics Engineers, Microwave Theory and Techniques Society (MTT-S), Baltimore, Maryland, June 5-10, 2011
- Density weighted FDF equations for simulations of turbulent reacting flows, Tsan-Hsing Shih, Nan-Suey Liu
- Design and test plans for a non-nuclear fission power system technology demonstration unit, Lee Mason [and others], (electronic resource)
- Development and implementation of a model-driven envelope protection system for in-flight ice contamination, David R. Gingras [and others], (electronic resource)
- Development of an open rotor cycle model in NPSS using a multi-design point approach, Eric S. Hendericks
- Development status of PEM non-flow-through fuel cell system technology for NASA applications, Mark A. Hoberecht, Ian J. Jakupca
- Dynamic testing of the NASA Hypersonic Project combined cycle engine testbed for mode transition experiments, T.J. Stueber ... [and others]
- Effect of test environment on lifetime of two vacuum lubricants determined by spiral orbit tribometry, Stephen V. Pepper
- Effect of upper-cycle temperature on the load-biased, strain-temperature response of NiTi, Santo Padula, II [and others], (electronic resource)
- Effect of water on the thermo-mechanical behavior of carbon cloth phenolic, Roy M. Sullivan, Eric H. Stokes, Eric H. Baker
- Effects of inlet distortion on aeromechanical stability of a forward-swept high-speed fan, Gregory P. Herrick ; prepared for the 46th Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Nashville, Tennessee, July 25-28, 2010
- Efficient design and analysis of lightweight reinforced core sandwich and PRSEUS structures, Brett A. Bednarcyk [and others], (electronic resource)
- Embedded acoustic sensor array for engine fan noise source diagnostic test : feasibility of noise telemetry via wireless smart sensors, Afroz Zaman, Matthew Bauch, Daniel Raible, (electronic resource)
- Enabling long-duration lunar equatorial operations with thermal wadi infrastructure, Heather L. Jones ... [and others] ; prepared for the 49th Aerospace Sciences Meeting sponsored by the American Institute of Aeronautics and Astronautics, Orlando, Florida, January 4-7, 2011
- Energy storage project, final report, Carolyn R. Mercer ... [and others]
- Energy storage technology development for space exploration, Carolyn R. Mercer ... [and others] ; prepared for the Space 2010 Conference and Exposition sponsored by the American Institute of Aeronautics and Astronautics, Anaheim, California, August 30 to September 2, 2010
- Enhanced core noise modeling for turbofan engines, James R. Stone, Eugene A. Krejsa, and Bruce J. Clark
- Evaluation of a passive heat exchanger based cooling system for fuel cell applications, Anthony J. Colozza, Kenneth A. Burke
- Evaluation of brushing as a lunar dust mitigation strategy for thermal control surfaces, James R. Gaier [and others], (electronic resource)
- Evaluation of surface modification as a lunar dust mitigation strategy for thermal control surfaces, James R. Gaier [and others], (electronic resource)
- Excitation/detection strategies for OH planar laser-induced fluorescence measurements in the presence of interfering fuel signal and absorption effects, Christopher M. Heath ... [and others] ; prepared for the 46th Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Nashville, Tennessee, July 25-28, 2010
- Exhaust nozzle plume effects on sonic boom test results for isolated nozzles, Raymond S. Castner ; prepared for the 28th Applied Aerodynamics Conference sponsored by the American Institute of Aeronautics and Astronautics, Chicago, Illinois, June 28-July 1, 20, (electronic resource)
- Experimental and modeling studies of the combustion characteristics of conventional and alternative jet fuels final report, Ellen Meeks ... [and others] ; prepared for the Turbo Expo 2010 sponsored by the American Society of Mechanical Engineers (ASME), Glasgow, Scotland, United Kingdom, June 14-18, 2010
- Experimental observations on the deformation and breakup of water droplets near the leading edge of an airfoil, Mario Vargas, Alex Feo ; prepared for the Atmospheric and Space Environments Conference sponsored by the American Institute of Aeronautics and Astronautics, Toronto, Ontario, Canada, August 2-5, 2010
- Experimental tests of UltraFlex array designs in low earth orbital and geosynchronous charging environments, Joel T. Galofaro and Boris V. Vayner, Grover B. Hillard
- Factors influencing dwell fatigue cracking in notches of powder metallurgy superalloys, T.P. Gabb ... [and others]
- Fiber optic strain sensor for planetary gear diagnostics, Jason S. Kiddy [and others], (electronic resource)
- Final report : Fire Prevention, Detection, and Suppression project : Exploration Technology Development Program, Gary A. Ruff
- Final report for intravenous fluid generation (IVGEN) spaceflight experiment, John B. McQuillen ... [and others]
- Fission Surface Power Systems (FSPS) Project final report for the Exploration Technology Development Program (ETDP) : fission surface power, transition face to face, Donald T. Palac
- Fission surface power technology development update, Donald T. Palac ... [and others] ; prepared for the Space 2010 Conference and Exposition sponsored by the American Institute of Aeronautics and Astronautics, Anaheim, California, August 30 to September 2, 2010
- Flow field characterization of an angled supersonic jet near a bluff body, John D. Wolter ... [and others]
- Flow matching results of an MHD energy bypass system on a supersonic turbojet engine using the numerical propulsion system simulation (NPSS) environment, Theresa L. Benyo
- Functionally graded adhesives for composite joints, Scott E. Stapleton and Anthony M. Waas, Steven M. Arnold, (electronic resource)
- Future fuel scenarios and their potential impact to aviation, Robert C. Hendricks ... [and others] ; prepared for the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery sponsored by the International Journal of Rotating Machinery (ISROMAC), Honolulu, Hawaii, February 26-March 2, 2006
- Gas flux and density surrounding a cylindrical aperture in the free molecular flow regime, George C. Soulas
- Gear mesh loss-of-lubrication experiments and analytical simulation, Robert F. Handschuh, Joseph Polly, and Wilfredo Morales, (electronic resource)
- Green aerospace fuels from nonpetroleum sources, Aloysius F. Hepp ... [and others]
- Ground-laboratory to in-space atomic oxygen correlation for the Polymer Erosion and Contamination Experiment (PEACE) polymers, Arielle H. Stambler ... [and others]
- Heat entrapment effects within liquid acquisition devices, W.M.B. Duval, D.J. Chato, and M.P. Doherty
- Helical face gear development under the Enhanced Rotorcraft Drive System Program, Gregory F. Heath [and others], (electronic resource)
- High intensity laser power beaming architecture for space and terrestrial missions, Taysir Nayfeh ... [and others]
- Hydrogen reduction of lunar regolith simulants for oxygen production, U. Hegde ... [and others]
- ISS solar array alpha rotary joint (SARJ) bearing failure and recovery : technical and project management lessons learned, Christopher DellaCorte and Timothy L. Krantz, Michael J. Dube
- Ice shape characterization using self-organizing maps, Stephen T. McClain, Peter Tino, Richard E. Kreeger ; prepared for the First Atmospheric and Space Environments Conference sponsored by the American Institute of Aeronautics and Astronautics, San Antonio, Texas, June 22-25, 2009
- Icing encounter duration sensitivity study, Harold E. Addy, Jr., Sam Lee, (electronic resource)
- Impact of material and architecture model parameters on the failure of woven Ceramic Matrix Composites (CMCs) via the multiscale generalized method of cells, Kuang C. Liu, Steven M. Arnold ; prepared for the 35th International Conference and Exposition on Advanced Ceramics and Composites (ICACC '11) sponsored by the American Ceramic Society, Daytona Beach, Florida, January 23-28, 2011, (electronic resource)
- Implementation of a sage-based stirling model into a system-level numerical model of the fission power system technology demonstration unit, Maxwell H. Briggs, (electronic resource)
- Implementation of enhanced propulsion control modes for emergency flight operation, Jeffrey T. Csank ... [and others] ; prepared for the Infotech@Aerospace 2011 Conference sponsored by the American Institute of Aeronautics and Astronautics, St. Louis, Missouri, March 29-31, 2011
- Improving data collection and analysis interface for the data acquisition software of the spin laboratory at NASA Glenn Research Center, Ali Abdul-Aziz, Ben S. Curatolo and Mark R. Woike
- Initial experiments of high-speed drive system windage losses, Robert F. Handschuh, Michael J. Hurrell
- Integration of NASA-developed lifing technology for PM alloys into DARWIN®, R. Craig McClung, Michael P. Enright, and Wuwei Liang
- Interfaces--weak links, yet great opportunities, Robert C. Hendricks ... [and others]
- Investigation of bearing fatigue damage life prediction using oil debris monitoring, Paula J. Dempsey ... [and others]
- Investigation of the mechanical performance of compliant thermal barriers, Jeffrey J. DeMange, Robert J. Bott, Patrick H. Dunlap, (electronic resource)
- L-band digital aeronautical communications system engineering : preliminary safety and security risk assessment and mitigation, Natalie Zelkin and Stephen Henriksen ; prepared for the International Civil Aviation Organization (ICAO) and Aeronautical Communications Panel (ACP) Working Group Meeting No. 16 sponsored by the International Civil Aviation Organization (ICAO), Paris, France, May 17-21, 2010
- L-band system engineering : concepts of use, systems performance requirements, and architecture, phase II : final report, Stephen Henriksen and Natalie Zelkin, (electronic resource)
- LES of a jet excited by the Localized Arc Filament Plasma Actuators, Clifford A. Brown
- Lateral load testing of the advanced Stirling converter (ASC-E2) heater head, Peggy A. Cornell ... [and others]
- Liquid methane conditioning capabilities developed at the NASA Glenn Research Center's Small Multi-purpose Research Facility (SMiRF) for accelerated lunar surface storage thermal testing, Helmut H. Bamberger ... [and others]
- Long-duration low- to medium-altitude solar electric airship concept, David J. Bents
- Mach 0.3 Burner Rig Facility at the NASA Glenn Materials Research Laboratory, Dennis S. Fox ... [and others]
- Mars ascent vehicle gross lift-off mass sensitivities for robotic mars sample return, Ian J. Dux ... [and others]
- Material characterization and geometric segmentation of a composite structure using microfocus x-ray computed tomography image-based finite element modeling, Ali Abdul-Aziz ... [and others]
- Material studies related to the use of NaK heat exchangers coupled to stirling heater heads, Ivan E. Locci ... [and others]
- Materials and structures research for gas turbine applications within the NASA subsonic fixed wing project, Janet Hurst
- Measurement of the critical distance parameter against icing conditions on a NACA 0012 swept wing tip, Mario Vargas and Richard E. Kreeger ; prepared for the First Atmospheric and Space Environments Conference sponsored by the American Institute of Aeronautics and Astronautics, San Antonio, Texas, June 22-25, 2009
- Microstructural characterization of metal foams : an examination of the applicability of the theoretical models for modeling foams, S.V. Raj
- Modeling C-band co-channel interference from AeroMACS omni-directional antennas to mobile satellite service feeder uplinks, Jeffrey D. Wilson
- NASA Glenn Research Center's fuel cell stack, ancillary and system test and development laboratory, Patricia L. Loyselle
- NASA's GreenLab Research Facility : a guide for a self-sustainable renewable energy ecosystem, B.M. McDowell Bomani [and others], (electronic resource)
- NEXT propellant management system integration with multiple ion thrusters, James S. Sovey, George C. Soulas and Daniel A. Herman
- Natural convection cooling of the advanced stirling radioisotope generator engineering unit, Edward J. Lewandowski, Dennis Hill
- Noncontacting laser inspection system for dimensional profiling of space application thermal barriers, Shawn C. Taylor ; prepared for the Fourth Japan US Symposium cosponsored by the Japanese Society for Non-Destructive Inspection (JSNDI) and the American Society for Non-Destructive Testing (ASNT), Maui, Hawaii, June 7-11, 2010
- Numerical implementation of a multiple-ISV thermodynamically-based work potential theory for modeling progressive damage and failure in fiber-reinforced laminates, Evan J. Pineda, Anthony M. Waas, (electronic resource)
- Numerical simulations of two-phase reacting flow in a single-element lean direct injection (LDI) combustor using NCC, Nan-Suey Liu, Tsan-Hsing Shih, C. Thomas Wey
- Numerical studies of an array of fluidic diverter actuators for flow control, Suleyman A. Gokoglu ... [and others]
- Oil-free shaft support system rotordynamics : past, present, and future challenges and opportunities, Christopher DellaCorte
- Oxide scales formed on NiTi and NiPtTi shape memory alloys, James L. Smialek ... [and others]
- Peak satellite-to-earth data rates derived from measurements of a 20 Gbps bread-board modem, David G. Landon ... [and others]
- Performance of a kilowatt-class Stirling power conversion system in a thermodynamically coupled configuration, Steven M. Geng and Maxwell H. Briggs, David S. Hervol
- Piloted simulation to evaluate the utility of a real time envelope protection system for mitigating in-flight icing hazards, Richard J. Ranaudo ... [and others]
- Planetary gearbox fault detection using vibration separation techniques, David G. Lewicki [and others] ; prepared for the 67th Annual Forum and Technology Display (Forum 67) sponsored by the American Helicopter Society (AHS), Virginia Beach, Virginia, May 3-5, 2011, (electronic resource)
- Post-test analysis of a 10-year sodium heat pipe life test, John H. Rosenfeld [and others], (electronic resource)
- Power management and distribution (PMAD) model development : final report, Kenneth J. Metcalf
- Preliminary investigation on battery sizing investigation for thrust vector control on Ares I and Ares V launch vehicles, Thomas B. Miller
- Preliminary performance of lithium-ion cell designs for Ares I Upper Stage applications, Thomas B. Miller and Concha M. Reid, Michael T. Kussmaul
- Probabilistic simulation for combined thermo-mechanical cyclic fatigue in composites, Christos C. Chamis
- Progress in materials and component development for advanced lithium-ion cells for NASA's exploration missions, Concha M. Reid
- Progress towards the development of a long-lived Venus lander duplex system, Rodger W. Dyson and Geoffrey A. Bruder ; prepared for the 8th International Energy Conversion Engineering Conference (IECEC) sponsored by the American Institute of Aeronautics and Astronautics, Nashville, Tennessee, July 25-28, 2010
- Properties and performance attributes of novel co-extruded polyolefin battery separator materials, Part 1, Mechanical properties, Richard S. Baldwin, Monica Guzik, Michael Skierski
- Propulsion controls and diagnostics research in support of NASA aeronautics and exploration mission programs, Sanjay Garg
- Proton exchange membrane fuel cell engineering model powerplant test report : benchmark tests in three spatial orientations, Patricia Loyselle, Kevin Prokopius
- Radiation specifications for fission power conversion component materials, Cheryl L. Bowman ... [and others]
- Radiation-spray coupling for realistic flow configurations, Hossam El-Asrag, Anthony C. Iannetti
- Recommendations for enabling manual component level electronic repair for future space missions, Peter M. Struk ... [and others]
- Reliability based design for a raked wing tip of an airframe, Surya N. Patnaik, Shantaram S. Pai and Rula M. Coroneos
- Resilient and corrosion-proof rolling element bearings made from superelastic Ni-Ti alloys for aerospace mechanism applications, Christopher DellaCorte ... [and others]
- Review of propulsion technologies for N+3 subsonic vehicle concepts, Scott W. Ashcraft ... [and others]
- Reynolds-averaged Navier-Stokes solutions to flat plate film cooling scenarios, Perry L. Johnson, Vikram Shyam and Chunill Hah
- Rolling-element fatigue testing and data analysis : a tutorial, Brian L. Vlcek, Erwin V. Zaretsky
- Round trip energy efficiency of NASA Glenn regenerative fuel cell system
- SCience Hybrid Orbiter and Lunar Relay (SCHOLR) architecture and design, Kathryn K. Trase ... [and others]
- Seeding cracks using a fatigue tester for accelerated gear tooth breaking, Nenad G. Nenadic ... [and others] ; prepared for IMAC XXIX A Conference and Exposition on Structural Dynamics sponsored by the Society for Experimental Mechanics (SEM), Jacksonville, Florida, January 31 to February 3, 2011
- Separating direct and indirect turbofan engine combustion noise while estimating post-combustion (post-flame) residence time using the correlation function, Jeffrey Hilton Miles
- Software users manual (SUM) : extended testability analysis (ETA) tool, William A. Maul and Christopher E. Fulton
- Sol-gel synthesis of La0.6SR0.4CoO3-x and Sm0.5Sr0.5CoO3-x cathode nanopowders for solid oxide fuel cells, Narottam P. Bansal and Brent Wise, (electronic resource)
- Solar electric propulsion (SEP) tug power system considerations, Thomas W. Kerslake [and others], (electronic resource)
- Sources of variation in creep testing, William S. Loewenthal, David L. Ellis, (electronic resource)
- Space Telecommunications Radio System (STRS) compliance testing, Louis M. Handler, (electronic resource)
- Space propulsion research facility (B-2) : an innovative, multi-purpose test facility, Gerald M. Hill ... [and others]
- SpaceWire Tiger Team findings and suggestions, Joseph A. Ishac
- Spreadsheet calculation of jets in crossflow : opposed rows of slots slanted at 45°, James D. Holdeman, James R. Clisset, Jeffrey P. Moder, (electronic resource)
- Statistical models of fracture relevant to nuclear-grade graphite : review and recommendations, Noel N. Nemeth, Robert L. Bratton
- Super cooled large droplet analysis of several geometries using LEWICE3D version 3, Colin S. Bidwell
- Symbol tables and branch tables linking applications together data, Louis M. Handler
- Taylor series trajectory calculations including oblateness effects and variable atmospheric density, James R. Scott
- Teledyne Energy Systems, Inc., proton exchange member (PEM) fuel cell engineering model powerplant : test report: initial benchmark tests in the original orientation, Patricia Loyselle, Kevin Prokopius
- Temperature and atomic oxygen effects on helium leak rates of a candidate main interface seal, Nicholas Penney, Janice L. Wasowski and Christopher C. Daniels ; prepared for the 46th Joint Propulsion Conference and Exhibit cosponsored by the AIAA, ASME, SAE, and ASEE, Nashville, Tennessee, July 25-28, 2010
- Terahertz computed tomography of NASA thermal protection system materials, D.J. Roth ... [and others]
- Test results from a pair of 1-kWe dual-opposed free-piston stirling power converters integrated with a pumped NaK loop, Steven M. Geng ... [and others]
- The Dust Management Project : final report, Mark J. Hyatt, Sharon Straka, (electronic resource)
- The NASA subsonic jet particle image velocimetry (PIV) dataset, James Bridges and Mark P. Wernet
- The atmospheric mutual coherence function from the first and second rytov approximations and its comparison to that of strong fluctuation theory, Robert M. Manning
- The effect of boundary support and reflector dimensions on inflatable parabolic antenna performance, Michael J. Coleman and Frank Baginski, Robert R. Romanofsky
- Thermal energy for lunar in situ resource utilization : technical challenges and technology opportunities, Pierce E. C. Gordon [and others] ; prepared for the 49th Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition sponsored by the American Institute of Aeronautics and Astronautics, Orlando, Florida, January 4-7, 2011, (electronic resource)
- Thermal optical properties of lunar dust simulants and their constituents, James R. Gaier, Shaneise Ellis, and Nichole Hanks, (electronic resource)
- Two-phase cryogenic heat exchanger for the thermodynamic vent system, Robert J. Christie
- Validation of proposed metrics for two-body abrasion scratch test analysis standards, Ryan L. Kobrick and David M. Klaus, Kenneth W. Street, Jr
Embed
Settings
Select options that apply then copy and paste the RDF/HTML data fragment to include in your application
Embed this data in a secure (HTTPS) page:
Layout options:
Include data citation:
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.missouri.edu/resource/QfZxgypAoSs/" typeof="PublicationEvent http://bibfra.me/vocab/lite/ProviderEvent"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.missouri.edu/resource/QfZxgypAoSs/">Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2011</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.missouri.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.missouri.edu/">University of Missouri Libraries</a></span></span></span></span></div>
Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements
Preview
Cite Data - Experimental
Data Citation of the ProviderEvent Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2011
Copy and paste the following RDF/HTML data fragment to cite this resource
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.missouri.edu/resource/QfZxgypAoSs/" typeof="PublicationEvent http://bibfra.me/vocab/lite/ProviderEvent"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.missouri.edu/resource/QfZxgypAoSs/">Cleveland, Ohio, National Aeronautics and Space Administration, Glenn Research Center, 2011</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.missouri.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.missouri.edu/">University of Missouri Libraries</a></span></span></span></span></div>
