ASTM International
Resource Information
The organization ASTM International represents an institution, an association, or corporate body that is associated with resources found in University of Missouri Libraries.
The Resource
ASTM International
Resource Information
The organization ASTM International represents an institution, an association, or corporate body that is associated with resources found in University of Missouri Libraries.
- Label
- ASTM International
A sample of Items by the Organization ASTM International See All
Context
Context of ASTM InternationalCreator of
No resources found
No enriched resources found
Contributor of
No resources found
No enriched resources found
- 18th international federation for heat treatment and surface engineering
- 1952 and 1953 Supplements to the bibliography and abstracts on electrical contacts
- 1954 supplement to the bibliography and abstracts on electrical contacts
- 1955 Supplement to the bibliography and abstracts on electrical contacts
- 1956 Supplement to the bibliography and abstracts on electrical contacts
- 1957 Supplement to the bibliography and abstracts on electrical contacts
- 1957 supplement to the metal cleaning bibliographical abstracts
- 1958 Supplement to the Bibliography and Abstracts on Electrical Contacts
- 1959 Supplement to the bibliography and abstracts on electrical contacts
- 1959 references on fatigue
- 1959 supplement to the Bibliography of spectrophotometric methods of analysis for inorganic ions : covering Analytical chemistry, the analyst, and Analytica chimica acta for the period 1952-1958
- 1961 Supplement to the bibliography and abstracts on electrical contacts
- 1963 Supplement to the bibliography and abstracts on electrical contacts, circuit breakers and ARC phenomena
- 1964 references on fatigue : (with additional 1963 references)
- A Guide to the safe handling of hazardous materials accidents
- A manual on methods for retrieving and correlating technical data
- ASTM INTERNATIONAL ENEWS
- ASTM manual for conducting an interlaboratory study of a test method
- ASTM manual on consumer sensory evaluation
- ASTM manual on fitting straight lines
- ASTM manual on quality control of materials : Part 1-Presentation of Data. Part 2-Presenting " Limits of Uncertainty of an Observed Average. Part 3-Control Chart Method of Analysis and Presentation of Data
- ASTM manual on zirconium and hafnium
- ASTM special technical publication
- ASTM standards
- ASTM viscosity index calculated from kinematic viscosity
- ASTM viscosity tables for kinematic viscosity conversions and viscosity index calculations
- ASTM's role in performance-based fire codes and standards
- Accelerated and outdoor durability testing of organic materials
- Access security screening : challenges and solutions
- Accreditation practices for inspections, tests, and laboratories
- Achievement of high fatigue resistance in metals and alloys : a symposium presented at the seventy-second annual meeting, American Society for Testing and Materials, Atlantic City, N.J., 22-27 June, 1969
- Acoustic emission : current practice and future directions
- Acoustic emission : standards and technology update
- Acoustic emission monitoring of pressurized systems : a symposium
- Acoustic emission testing of aerial devices and associated equipment used in the utility industries
- Acoustic emissions in geotechnical engineering practice : a symposium
- Adhesion measurement of thin films, thick films, and bulk coatings : a symposium presented at ASTM headquarters, American Society for Testing and Materials, Philadelphia, Pa., 2-4 Nov. 1976
- Adhesion or cold welding of materials in space environments : [papers]
- Adhesively bonded joints : testing, analysis, and design
- Advanced composite materials--environmental effects : a symposium
- Advanced testing techniques : a symposium presented at the seventy-second annual meeting, American Society for Testing and Materials, Atlantic City, N.J., 22-27 June 1969
- Advanced triaxial testing of soil and rock
- Advances in adhesives, adhesion science, and testing
- Advances in electron metallography
- Advances in electron metallography : a symposium presented at the 68th annual meeting, American Society for Testing and Materials, Vol. 6
- Advances in environmental measurement methods for asbestos
- Advances in fatigue crack closure measurement and analysis : second volume
- Advances in fatigue lifetime predictive techniques
- Advances in fatigue lifetime predictive techniques, 3rd volume
- Advances in fatigue lifetime predictive techniques, Second volume
- Advances in geosynthetic clay liner technology : 2nd symposium
- Advances in gypsum technologies and building systems
- Advances in luminescence spectroscopy : a symposium
- Advances in multiaxial fatigue
- Advances in the production and use of steel with improved internal cleanliness
- Advances in the state of the art of fire testing
- Advances in the technology of stainless steel
- Advances in thermoplastic matrix composite materials
- Aggregate contribution to hot mix asphalt (HMA) performance
- Air change rate and airtightness in buildings
- Air quality and comfort in airliner cabins
- Air quality meteorology and atmospheric ozone : a symposium
- Airflow performance of building envelopes, components, and systems
- Alkalies in concrete : a symposium
- Alternative bearing surfaces in total joint replacement
- Alternatives to chlorofluorocarbon fluids in the cleaning of oxygen and aerospace systems and components
- American National Standard for metric practice
- An evaluation of the elevated temperature, tensile, and creep-rupture properties of wrought carbon steel
- Analysis of biofuels : a laboratory resource
- Analysis of paints and related materials : current techniques for solving coatings problems
- Analysis of reactor vessel radiation effects surveillance programs
- Analysis of soils contaminated with petroleum constituents
- Analysis of the test methods for high modulus fibers and composites : a symposium presented at a meeting of Committee D-30 on High Modulus Fibers and Their Composites, American Society for Testing and Materials.
- Analysis of waters associated with alternative fuel production : a symposium sponsored by ASTM Committee D-19 on Water, American Society for Testing and Materials, Pittsburgh, Pa., 4-5 June 1979 ; L.P. Jackson, C.C. Wright, editors
- Analytical and experimental methods for residual stress effects in fatigue
- Analytical methods developed for application to lunar samples analyses
- Analytical techniques for hydraulic cement and concrete
- Appearance of metallic surfaces : a symposium presented at the seventy-first annual meeting, American Society for Testing and Materials, San Francisco, Calif., 23-28 June 1968
- Application of 2 1/4Cr-1Mo steel for thick-wall pressure vessels : a symposium
- Application of accelerated corrosion tests to service life prediction of materials
- Application of advanced and nuclear physics to testing materials : a symposium presented at the International Conference on Materials
- Application of agricultural analysis in environmental studies
- Application of composite materials
- Applications of automation technology in fatigue and fracture testing and analysis : fourth volume
- Applications of automation technology to fatigue and fracture testing
- Applications of automation technology to fatigue and fracture testing and analysis : third volume
- Applications of continuum damage mechanics to fatigue and fracture
- Applications of electron microfractography to materials research
- Applications of inductively coupled plasma-mass spectrometry to radionuclide determinations
- Applications of modern metallographic techniques
- Applications of radiation thermometry : a symposium
- Applications related phenomena in titanium alloys : [papers]
- Applications-related phenomena in zirconium and its alloys
- Applied surface analysis : a symposium
- Aquatic invertebrate bioassays : a symposium
- Aquatic toxicology : proceedings of the Second Annual Symposium on Aquatic toxicology : a symposium
- Aquatic toxicology : proceedings of the third annual Symposium on Aquatic Toxicology : a symposium sponsored by ASTM Committe E-35 on Pesticides, American Society for Testing and Materials, New Orleans, La., 17-18 Oct. 1978
- Aquatic toxicology and environmental fate : a symposium
- Aquatic toxicology and environmental fate, Eleventh volume
- Aquatic toxicology and hazard assessment : 10th volume
- Aquatic toxicology and hazard assessment : eighth symposium : a symposium
- Aquatic toxicology and hazard assessment : proceedings of the Fifth Annual Symposium on Aquatic Toxicology: a symposium
- Aquatic toxicology and hazard assessment : proceedings of the fourth annual Symposium on Aquatic Toxicology : a symposium
- Aquatic toxicology and hazard assessment, 12th volume
- Aquatic toxicology and hazard assessment, seventh symposium : a symposium
- Aquatic toxicology and hazard assessment, sixth symposium : a symposium
- Aquatic toxicology and hazard evaluation : proceedings of the first annual Symposium on Aquatic Toxicology : a symposium
- Aquatic toxicology and risk assessment : fourteenth volume
- Aquatic toxicology and risk assessment, thirteenth volume
- Articles on fatigue : references to articles published in 1950 dealing with fatigue
- Asbestos control : surveys, assessment, abatement, and maintenance
- Aspects of lubricant oxidation : a symposium
- Asphalt concrete mix design : development of more rational approaches
- Asphalt emulsions
- Asphalt pavement construction : new materials and techniques : a symposium
- Asphalt rheology : relationship to mixture : a symposium sponsored by ASTM Committee D-4 on Road and Paving Materials, Nashville, TN, 11 Dec. 1985
- Assignment of the glass transition
- Atmospheric corrosion
- Atmospheric corrosion investigation of aluminum-coated, zinc-coated and copper-bearing steel wire and wire products
- Atmospheric corrosion investigation of aluminum-coated, zinc-coated, and copper-bearing steel wire and wire products (a twelve year report)
- Atmospheric corrosion investigation of aluminum-coated, zinc-coated, and copper-bearing steel wire and wire products : a twenty-year report
- Atmospheric corrosion of metals : a symposium
- Atmospheric factors affecting the corrosion of engineering metals : proceedings of the Golden Anniversary Symposium Commemorating 50 Years' Atmospheric Exposure Testing : a symposium
- Automated analyzers and quality control for the petroleum industry
- Automated manufacturing : a symposium
- Automated test methods for fracture and fatigue crack growth : a symposium sponsored by ASTM Committees E-9 on Fatigue and E-24 on Fracture Testing, Pittsburg, PA, 7-8 Nov. 1983
- Automation in fatigue and fracture : testing and analysis
- Automation of mechanical testing
- Automotive lubricant testing and advanced additive development
- Automotive lubricant testing and advanced additive development
- Autonomous industrial vehicles : from the laboratory to the factory floor
- Avian and mammalian wildlife toxicology : a symposium
- Avian and mammalian wildlife toxicology : second conference : a symposium
- Aviation fuel : thermal stability requirements
- Bacterial indicators/health hazards associated with water : a symposium ; Chicago, Ill., 28-29 June 1976
- Basic principles of sensory evaluation
- Basic questions in fatigue
- Bearing steel technologies : 10th volume : advances in steel technologies for rolling bearings
- Bearing steel technologies : 11th volume, progress in steel technologies and bearing steel quality assurance
- Bearing steel technology
- Bearing steel technology : advances and state of the art in bearing steel quality assurance, 7th volume
- Bearing steels : into the 21st century
- Bearing steels, the rating of nonmetallic inclusion : a symposium presented at May Committee Week, American Society for Testing and Materials, Boston, Mass., 22-24 May 1974
- Behavior of deep foundations : a symposium
- Behavior of materials at cryogenic temperatures
- Behavior of polymeric materials in fire : a symposium
- Bench testing of industrial fluid lubrication and wear properties used in machinery applications
- Beyond the implant : retrieval analysis methods for implant surveillance
- Bibliographical abstracts of methods for analysis of synthetic detergents
- Bibliographical abstracts of methods for analysis of synthetic detergents : 1888-1956
- Bibliographical abstracts of methods for analysis of synthetic detergents, 1933-1957, Supplement, 1959
- Bibliographical abstracts on evaluation of brightening agents for detergent usage [1929-1961]
- Bibliographical abstracts on evaluation of fluorescent whitening agents, 1929-1968
- Bibliographical abstracts on redeposition of soil on cotton fabric
- Bibliography and abstracts on electrical contacts, 1835-1951
- Bibliography and abstracts on primary soil deposition, 1931-1961
- Bibliography and abstracts on thermostat metals, 1806-1959
- Bibliography of photoelectric spectrophotometric methods of analysis for inorganic ions
- Bibliography on low-cycle fatigue, 1957-1967, Part I, Sub-divided references
- Biofuels
- Biofuels
- Biological contaminants in indoor environments
- Biological methods for the assessment of water quality : a symposium presented at the seventy-fifth annual meeting, American Society for Testing and Materials.
- Biological monitoring of water and effluent quality : a symposium, Blacksburg, Va., 2-4 Nov. 1975
- Biomaterials' mechanical properties
- Bioprocessing safety : worker and community safety and health considerations
- Bioremediation of pollutants in soil and water
- Bituminous paving materials: symposium on methods of test for design of bituminous paving mixtures : symposium on practical and statistical significance of tests and properties of bituminous binders ; session on road and paving materials.
- Black box data from accident vehicles : methods of retrieval, translation, and interpretation
- Blended cements : a symposium
- Bone graft substitutes and bone regenerative engineering
- Building air change rate and infiltration measurements : a symposium
- Building applications of heat flux transducers : a symposium
- Building deck waterproofing
- Building facade maintenance, repair, and inspection
- Building performance : function, preservation, and rehabilitation : a symposium sponsored by ASTM Committee E-6 on Performance of Building Constructions, Bal Harbour, FL, 17 Oct. 1983
- Building sealants : materials, properties, and performance
- Building seals and sealants
- Building security : a symposium
- Buried plastic pipe technology
- Buried plastic pipe technology : 2nd volume
- Business performance excellence through total quality management
- Calculation of physical properties of petroleum products from gas chromatographic analyses : a symposium
- Calibration in air monitoring : a symposium presented at the University of Colorado at Boulder, Colo., 5-7 Aug. 1975
- Carbonate additions to cement
- Case histories involving fatigue and fracture mechanics : a symposium
- Case studies for fatigue education
- Cell-culture test methods : a symposium sponsored by ASTM Committee F-4 on Medical and Surgical Materials and Devices, Dearborn, Mich., 11 May 1982
- Cement standards, evolution and trends : a symposium, St. Louis, Mo., 7 Dec. 1977
- Changes in characteristics of Portland cement as exhibited by laboratory tests over the period 1904 to 1950
- Characterization and determination of erosion resistance : a symposium presented at the seventy-second annual meeting, American Society for Testing and Materials, Atlantic City, N.J., 22-27 June 1969
- Characterization and performance of calcium phosphate coatings for implants
- Characterization and properties of ultra-high molecular weight polyethylene
- Characterizing sources of indoor air pollution and related sink effects
- Charpy impact test : factors and variables
- Chemical analysis of metals : a symposium
- Chemical and biological characterization of municipal sludges, sediments, dredge spoils, and drilling muds
- Chemical dispersants for the control of oil spills : a symposium
- Chemical protective clothing performance in chemical emergency response
- Chevron-notch fracture test experience : metals and non-metals
- Chevron-notched specimens, testing and stress analysis : a symposium
- Child-resistant packaging : a symposium
- Chloride corrosion of steel in concrete : a symposium presented at the seventy-ninth annual meeting, American Society for Testing and Materials, Chicago, Ill., 27 June-2 July 1976
- Chlorosilane emergency response guidelines
- Cleaning stainless steel : a symposium
- Cleaning stone and masonry : a symposium sponsored by ASTM Committee E-6 on Performance of Building Constructions, Louisville, KY, 18 April 1983
- Clinical and laboratory performance of bone plates
- Cobalt-base alloys for biomedical applications
- Cold cleaning with halogenated solvents : a manual
- Commercial opportunities for advanced composites
- Common ground, consensus building, and continual improvement : standards and sustainable building, first international symposium
- Common ground, consensus building, and continual improvement : standards and sustainable building, first international symposium
- Community noise : a symposium sponsored by ASTM Committee E33 on Environmental Acoustics, American Society for Testing and Materials, Kansas City, Mo., 24-26 May 1978
- Community toxicity testing : a symposium
- Compaction of soils : a symposium presented at the sixty-seventh annual meeting, American Society for Testing and Materials, Chicago, Ill., June 23, 1964
- Comparison of the properties of basic oxygen and open hearth steels
- Compilation of chemical compositions and rupture strengths of super-strength alloys
- Compilation of gas chromatographic data
- Composite materials : fatigue and fracture : Papers presented at the fourth symposium which was held in Indianapolis, Indiana on 6-7 May 1991.
- Composite materials : fatigue and fracture : Papers presented at the sixth symposium held 16-18 May 1995 in Denver, Colo, Sixth volume
- Composite materials : fatigue and fracture : Papers presented at the third symposium held in Lake Buena Vista, Fla., Nov. 6-7, 1989 and sponsored by Committee D30 on High Modulus Fibers and Their Composites, Third volume
- Composite materials : fatigue and fracture : a symposium sponsored by ASTM Committee D-30 on High Modulus Fibers and Their Composites, Dallas, TX, 24-25 Oct. 1984
- Composite materials : fatigue and fracture ; Papers presented at the Second Symposium on Composite Materials: Fatigue and Fracture, held in Cincinnati, Ohio, Apr. 27-28, 1987, Second volume
- Composite materials : fatigue and fracture, Fifth volume
- Composite materials : fatigue and fracture, Seventh volume
- Composite materials : testing and design (eighth conference)
- Composite materials : testing and design (eleventh volume)
- Composite materials : testing and design (fourth conference) : a conference
- Composite materials : testing and design (ninth volume)
- Composite materials : testing and design (seventh conference) : a conference : Philadelphia, PA, 2-4 April 1984
- Composite materials : testing and design (sixth conference) : a conference
- Composite materials : testing and design (tenth volume)
- Composite materials : testing and design (thirteenth volume)
- Composite materials : testing and design (twelfth volume)
- Composite materials : testing and design, fourteenth volume
- Composite materials : testing, design, and acceptance criteria
- Composite materials for implant applications in the human body : characterization and testing
- Composite materials, quality assurance, and processing : a symposium
- Composite materials, testing and design (fifth conference) : a conference
- Composite materials, testing and design (third conference) : a conference sponsored by the American Society for Testing and Materials, Williamsburg, Va., 21-22 March 1973 : [papers]
- Composite materials: testing and design
- Composite reliability : a symposium presented at Las Vegas, Nev., 15-16 April 1974, American Society for Testing and Materials
- Composite structures : theory and practice
- Composites bonding
- Composites for extreme environments : a symposium
- Compositional analysis by thermogravimetry
- Compression response of composite structures
- Compression testing of homogeneous materials and composites : a symposium
- Computer automation of materials testing : a symposium
- Computer modeling in corrosion
- Computerization and data management in the metals analysis laboratory
- Computerization and networking of materials data bases
- Computerization and networking of materials databases, Fifth volume
- Computerization and networking of materials databases, Fourth volume
- Computerization and networking of materials databases, Second volume
- Computerization and networking of materials databases, Third volume
- Computerized chemical data standards : databases, data interchange, and information systems
- Computerized laboratory systems : a symposium presented at the Pittsburgh conference, American Society for Testing and Materials, Cleveland, Ohio, 4-5 March 1974
- Computerized quantitative infrared analysis : a symposium sponsored by ASTM Committee E-13 on Molecular Spectroscopy and Federation of Analytical Chemistry and Spectroscopy Societies (FACSS), Philadelphia, PA, 18 Sept. 1984
- Concrete pipe and box culverts
- Concrete pipe and the soil-structure system : a symposium presented at the seventy-ninth annual meeting American Society for Testing and Materials, Chicago, Ill., 27 June-2 July, 1976
- Concrete pipe for the new millennium
- Consolidation of soils : testing and evaluation : a symposium
- Constraint effects in fracture
- Constructing and controlling compaction of earth fills
- Constructing smooth hot mix asphalt (HMA) pavements
- Contaminated sediments : characterization, evaluation, mitigation/restoration, and management strategy performance
- Contaminated sediments : evaluation and remediation techniques
- Continuous anesthesia gas monitoring
- Continuous measurement of the cure rate of rubber : a symposium presented at the sixty-seventh annual meeting American Society for Testing and Materials, Chicago, Ill., June 25, 1964
- Corona measurement and interpretation
- Correlating sensory objective measurements - new methods for answering old problems : a symposium sponsored by ASTM Committee E-18 on Sensory Evaluation of Materials and Products, American Society for Testing and Materials Philadelpia, Pa., 11-12 Nov. 1974
- Correlation of deep-drawing press performance with tensile properties : a report on co-operative research of the USA Committee of the International Deep Drawing Group
- Correlation of subjective-objective methods in the study of odors and taste
- Corrosion and degradation of implant materials : a symposium
- Corrosion effect of stray currents and the techniques for evaluating corrosion of rebars in concrete : a symposium
- Corrosion forms and control for infrastructure
- Corrosion in natural environments : three symposia presented at the seventy-sixth annual meeting American Society for Testing and Materials, Philadelphia, Pa. 24-29 June 1973
- Corrosion in natural waters
- Corrosion monitoring in industrial plants using nondestructive testing and electrochemical methods : a symposium
- Corrosion of electronic and magnetic materials
- Corrosion of metals in association with concrete : a manual sponsored by ASTM Subcommittee G01.14 on Corrosion of Reinforcing Steel, and Metal Properties Council
- Corrosion of metals under thermal insulation : a symposium sponsored by ASTM Committees C-16 on Thermal Insulation [and others]
- Corrosion of reinforcing steel in concrete : a symposium
- Corrosion of zirconium alloys : a symposium presented at the 1963 winter meeting, American Nuclear Society, New York, N.Y., November 20, 1963
- Corrosion rates of steel in concrete
- Corrosion testing and evaluation : silver anniversary volume
- Corrosion testing in natural waters, Second volume
- Corrosion-fatigue technology : a symposium presented at November Committee Week, American Society for Testing and Materials, Denver, Colo., 14-19 Nov. 1976
- Crack arrest methodology and applications : a symposium
- Cracks and fracture : proceedings of the Ninth National Symposium on Fracture Mechanics : a symposium sponsored by Committee E-24 on Fracture Testing of Metals, American Society for Testing and Materials, University of Pittsburgh, Pittsburgh, Pa., 25-27 Aug. 1975
- Creative applications : sensory techniques used in conducting packaging research with consumers
- Creative use of bearing steels
- Creep of zirconium alloys in nuclear reactors
- Creep-fatigue interactions : test methods and models
- Crosslinked and thermally treated ultra-high molecular weight polyethylene for joint replacements
- Cryogens and gases: testing methods and standards development : a symposium.
- Current practices in ground water and vadose zone investigations
- Current technologies in flexible packaging : a symposium sponsored by ASTM Committee F-2 on Flexible Barrier Materials and the Flexible Packaging Association, St. Charles, IL, 1 Nov. 1984
- Current trends in protective packaging of computers and electronic components
- Cyclic cabinet corrosion testing
- Cyclic deformation, fracture, and nondestructive evaluation of advanced materials
- Cyclic deformation, fracture, and nondestructive evaluation of advanced materials, Second volume