#
Strains and stresses
Resource Information
The concept ** Strains and stresses** represents the subject, aboutness, idea or notion of resources found in **University of Missouri Libraries**.

The Resource
Strains and stresses
Resource Information

The concept

**Strains and stresses**represents the subject, aboutness, idea or notion of resources found in**University of Missouri Libraries**.- Label
- Strains and stresses

## Context

Context of Strains and stresses#### Subject of

No resources found

No enriched resources found

- A comparative determination of weld shearing values in welded wire reinforcement fabric
- A complete design of a 210 foot R.R. bridge
- A constitutive model for creep damage of geomembranes
- A course on the stresses in bridge and roof trusses, arched ribs and suspension bridges : prepared for the Department Civil Engineering at the Rensselaer Polytechnic Institute
- A generalization of the finite deflection theory of sandwich plates
- A geometric method for the prediction of stresses in inclusions, orebodies, and mining systems
- A high office building
- A method for the prediction of stresses in an isotropic inclusion or orebody of irregular shape
- A method of determining dynamic tensile strength of rock at minimum loading
- A multipurpose projectile for penetrating urban targets
- A new method of analysis to obtain exact solutions for stresses and strains in circular inclusions
- A numerical procedure for the analysis of pressure vessel heads
- A photoelastic study of the effect of certain geometric variables on the plane stress distribution in an electrical insulator body
- A preliminary investigation of strains and fracturing in small hydro-stone beams due to impact loading
- A problem on stress waves in an infinite elastic plate
- A semi-graphical method of analysis for horizontally curved beams
- A semi-micromechanic interlaminar strain analysis on curved-beam specimens : final report, April-December 31 1990 under grant NCC 2-673
- A solid-inclusion borehole probe to determine three-dimensional stress changes at a point in a rock mass : development and laboratory testing of a solid-inclusion borehole instrument and the mathematical bases for reduction of the three-dimensional data produced by the instrument
- A study of fracture mechanisms in ATD roller bearing
- A study of the dislocation instability and reverse martensitic transformation in FE-NI system
- A study of the effect of a square cutout on the moment distribution in a simply supported rectangular plate under normal concentrated load by the Moireʹ fringe method
- A study of the influence of some secondary effects on beams on an elastic foundation and on vibrating beams
- A study of the stress distribution around circular openings using multilayered photoelastic material
- A study of the stresses in a curved beam of hollow square cross section under loads normal to the plane of its axis
- A study of the void-strengthening of aluminum and its nature
- A translation of the Stability of elastic equilibrium
- A translation of the Stability of elastic equilibrium
- A yield and fracture model for TI-6AL-4V titanium and 7075-T6 aluminum
- Addendum to the DYCAST user's manual describing the curved, warp beam finite element
- Advanced mechanics of materials
- Advanced mechanics of materials
- Advanced mechanics of materials
- Advanced one-dimensional optical strain measurement system--phase IV
- Advanced strength and applied stress analysis
- Aircraft structural analysis
- Aircraft structural mechanics
- Aircraft structures
- Airplane design ; : a textbook of airplane layout and stress analysis calculations with particular emphasis on economics of design
- Airplane propeller principles
- Airplane stress analysis ; : an introductory treatise
- Aleatory uncertainty and scale effects in computational damage models for failure and fragmentation
- An analog method for the determination of the deflection of beams resting on end supports and design of an automatic programming device
- An analysis of the wear behavior of SiC whisker reinforced alumnina from 25 to 1200C̊
- An analytical and numerical analysis of dynamic failure based on the multi-physics involved
- An analytical study of the nonlinear interface in fibrous composites
- An approximate solution for interlaminar stresses in laminated composites
- An economy study of Vierendeel trusses
- An elastic-plastic constitutive relation for transverse-isotropic three-phase earth materials
- An elementary treatise on statically indeterminate stresses
- An elementary treatise on statically indeterminate stresses
- An introduction to experimental stress analysis
- An introduction to the theory of elasticity for engineers and physicists
- An investigation of buckling of steel cylinders with circular cutouts reinforced in accordance with ASME rules
- An investigation of crack-tip stress field criteria for predicting cleavage-crack initiation
- An investigation of the application of photoelastic coatings to soil studies
- An investigation of the creep characteristics of Portland cement mortar under static and dynamic strain
- An investigation of the distribution of stresses over the surface of high tension insulators
- An investigation of the performance characteristics of reinforced brick masonry slabs
- An investigation of the stresses in reinforced concrete piles during driving
- Analysis of deformation
- Analysis of impulsively loaded circular plates
- Analysis of slender helical anchors loaded in compression
- Analysis of stress in circular elastic rings under the action of body forces and external loading
- Analysis of thermal residual stress in WC-NI composites using neturon diffraction and finite element methods
- Analytical and experimental studies of a beam with a geometric nonlinearity
- Analytical investigation of bending effects on the stability of a tube subjected to external pressure
- Application of a finite element model update technique to detect damage in a beam structure
- Application of the photoelastic coating method to evaluate the stress distribution on the external surface of the cap of an electrical insulator
- Applied elasticity
- Applied elasticity
- Applied stress analysis
- Applied stress analysis
- Applied stress analysis for plastics : a mechanical engineering approach
- Approximating the stress field within the unit cell of a fabric reinforced composite using replacement elements
- Axially compressed structures : stability and strength
- Basic structures
- Bauelemente des flugzeuges, nach vorlesungen
- Beams on elastic foundation : theory with applications in the fields of civil and mechanical engineering
- Beams on elastic foundation : theory with applications in the fields of civil and mechanical engineering
- Behavior of crimped cold-formed steel C-section beams
- Belastungsglieder : Formeln und Zahlentafeln für Querkräfte, Momente und Belastungsglieder (Kreuzlinienabschnitte) des einfachen Balkens sowie Einspannmomente des eingespannten Trägers für alle praktisch vorkommenden Belastungen nebst einleitenden theoretischen Entwicklungen und Betrachtungen ; Hilfsbuch zur Berechnung von Rahmen und durchlaufenden Trägern ; Formeln und Zahlentafeln für W- und W-Steigungs-Zahlen
- Bending properties of four-layer nail-laminated posts
- Berechnung des Eisenbetons gegen Verdrehung (Torsion) und Abscheren
- Biaxial device for determining the modulus of elasticity of stress-relief cores
- Biegeschwingungen eines Stabes mit kleiner Vorkrümmung, exzentrisch angreifender pulsierender Axiallast und statischer Querbelastung
- Blast resistant forced entrty [sic] steel stud wall design
- Blast resistant steel stud wall design
- Brittle lacquers for strain measurement
- Combined bending and torsion of I beams of monosymmetrical cross section : a non-linear theory taking into account the risk of lateral buckling
- Combined bending and torsion of simply supported beams of bisymmetrical cross section
- Compatibility equations for a Cosserat surface
- Computational methods for global/local analysis
- Computer code defect in stress analysis of piping elbow
- Concrete quality assurance using accelerated strength testing
- Contact problem by finite element method
- Contact stresses for closely conforming bodies--application to cylinders and spheres
- Contribution à l'étude des dislocations cristallines produites dans des métaux par des torsions simples et alternées
- Cooperative investigation of measurement of stress in steel truss members, with field verification on the Missouri River Bridge at Jefferson City : Project F97 (10) Cole and Callaway counties : final report
- Cylindrical shells : application of the theory of elasticity and the theory of rupture to the design of cylindrical roofs, tanks, tubes, pipe lines, and other thin-walled cylindrical structures
- Das Prinzip der fortgeleiteten Verformung als Weg zur Ausschaltung der Unbekannten aus dem Formänderungsverfahren
- Deflection and rupture of thin nickel membranes
- Deflections and statically indeterminate stresses
- Design against blast : load definition & structural response
- Design of Vierendeel Trusses
- Design of concrete structures using high-strength steel reinforcement
- Design of concrete structures with stress fields
- Design of multiple-ply laminated composite tapered beams
- Designing against fatigue of metals
- Determination of principal stress directions through an analysis of rock joint and fracture orientations, Star Mine, Burke, Idaho
- Development of a rock stress monitoring station based on the flat slot method of measuring existing rock stress
- Development of an NBS polymer gage for dynamic soil stress measurement
- Development of non-linear finite element computer code : final report to California Institute of Technology, Jet Propulsion Laboratory
- Developments in stress analysis
- Die Berechnung mehrstöckiger Rahmen : ein zeitsparendes Verfahren mit Berücksichtigung der Knotenverschieblichkeit in einfacher Form
- Die Lehre von der Elasticitaet und Festigkeit : mit besonderer Rücksicht auf ihre Anwendung in der Technik, für polytechnische Schulen, Bauakademien, Ingenieure, Maschinenbauer, Architecten, etc
- Die zusatzkräfte und nebenspannungen eiserner fachwerkbrücken : eine systematische darsteillung der verschiedenen arten
- Die zweiseitig gelagerte Platte : die statische Berechnung von zweiseitig gelagerten Platten mit beliebigem Seitenverhältnis und beliebigen Belastungen mittels Einfluss- und Zustandsflächen
- Dissipation of mechanical work and temperature rise in AS4/PEEK thermoplastic composite
- Distribution of deformation : a new method of structural analysis
- Distribution of load stresses in highway bridges : presented at the thirty-first annual meeting, January 1952
- Distribution of stress in the Westvaco Trona Mine, Westvaco, Wyo.
- Douglas fir use book
- Durchlaufträger ...
- Dynamic influences of smoothly running loads on simply supported girders
- Dynamic links between short-term deformation and long-term tectonics : a finite element study
- Dynamic loading on parallel shaft gears
- Dynamic response of materials to intense impulsive loading
- Dynamics of vehicle-structure interaction : rapid transit structures
- Eccentric loads on concrete
- Effect of concrete shrinkage on stresses in reinforcing steel
- Effect of shear stress on dynamic bulk modulus of sand
- Effects of pressure on the mechanical properties of magnesium
- Effects of stress relief and other changes in stress on the physical properties of rock
- Einflussfelder orthogonal anisotroper Platten : Influence surfaces of orthogonal anisotropic plates
- Elastic stresses in structures
- Elastic-plastic characterization of a cast stainless steel pipe elbow material
- Elasticity and strength
- Elasticity in engineering
- Electro optical system to measure strains at high temperature : final report
- Elementary stress analysis
- Elementary theory and design of flexural members
- Elements of Experimental stress analysis
- Elements of stress analysis
- Energy theorems and structural analysis : a generalised discourse with applications on energy principles of structural analysis including the effects of temperature and nonlinear stress-strain relations
- Engineering and design : working stresses for structural design
- Engineering mechanics
- Engineering structural failures : the causes and results of failure in modern structures of various types
- Environmental and strain rate effects on graphite/epoxy composites
- Equilibrium of shell structures
- Evaluation of hybrid anchor system for blast resistant steel stud wall design
- Evaluation of residual stress
- Evaluation of sample disturbance on soils using the concept of "reference strain"
- Evaluation of stay-in-place PVC-formed concrete walls for blast design
- Evolution of allowable stresses in shear for lumber
- Experimental and analytical analysis of stress-strain behavior in a [90/0̊]2̊s, SiC/Ti-15-3 laminate
- Experimental determination of dynamic properties of aluminum including Poisson's ratio
- Experimental evaluation of stress concentration and intensity factors : useful methods and solutions to experimentalists in fracture mechanics
- Experimental moment-shear interaction and TFA behavior in hybrid plate girders
- Experimental stress analysis
- Experimental stress analysis
- Experimental stress analysis
- Experimental stress analysis : principles and methods
- Experimental stress analysis and motion measurement : theory, instruments and circuits, techniques
- Experimental tension field action behavior in HPS plate girders
- Experimental testing of HPS hybrid plate girders in shear
- Experimential [sic] moment-shear interaction testing on HPS hybrid girders
- Failure of materials in mechanical design : analysis, prediction, prevention
- Faltwerke, ihre Theorie und Berechnung
- Fatigue as a design criterion
- Fatigue of materials and structures, Application to damage and design
- Fatigue study of cantilevered traffic signal mast arms
- Fatigue study of cantilevered traffic signal mast arms
- Fiber-reinforced wood composites
- Finite element analysis and fatigue test on the bicuspids to support theory of abfraction
- Finite element analysis of connector contacts
- Finite element analysis of stiffness and critical stresses within an intervertebral disc prosthesis
- Finite element modeling of intermediate support regions of continuous span beams
- Finite element stress analysis of a right first molar restored with a composite resin
- Folding and fracturing of rocks
- Fracture toughness data for brittle materials
- Fracturing of metals ; : a seminar on the fracturing of metals held during the Twenty-ninth National Metal Congress and Exposition, Chicago, October 18 to 24, 1947 ...
- Framed structures and girders : theory and practice
- Fundamentals of aircraft structures
- Fundamentals of cyclic stress and strain
- Fundamentals of seismic loading on structures
- Fundamentals of stress analysis
- Funktionssättet hos elastiska balkar, åverkade av detonationsbelastningar med hänsyn tagen till rotationströghet och skjuvkrafter : Behaviour of elastic beams under action of detonating charges with special reference to rotatary inertia and shearing forces
- Generation and propagation of strain waves in rock, Part 1
- Global/local stress analysis of composite panels
- Graphics and structural design
- Handbook of experimental stress analysis
- High strain properties of advanced high strength spot welded steels
- High strain rate properties of angle-ply composite laminates, Part III, Final report
- High strain rate properties of off-axis composite laminates : final report, Part II
- High temperature strain measurement with a resistance strain gage [microform]
- In-situ strees project, technical report number 6 : results of hydraulic fracturing stress measurements at Jianchuan, western Yunnan Province, China
- Inelastic solids and structures : Antoni Sawczuk memorial volume
- Inelastic strain analysis of solder joint in NASA fatigue speciment : final report
- Inelasticity of materials : an engineering approach and a practical guide
- Influence lines for horizontally curved fixed-end beams of circular-arc plan
- Influence of erosional unloading on the state of stress for low amplitude single-layer buckle folds - implications for tensile fracture occurrence
- Influence of juvenile wood content on shear parallel, compression, and tension transverse to grain strength and mode I fracture toughness for loblolly pine
- Influence of primary creep on stresses in structural parts
- Instrumentation and monitoring of high performance concrete prestressed bridge girders
- Instrumentation and monitoring of high performance concrete prestressed bridge girders
- Integrated buildings : the systems basis of architecture
- Interacting stress concentration factors and their effect on fatigue of metallic aerostructures
- Interfacial stress transfer and debonding in composite materials
- Internal friction in manganese copper alloys
- Internal stresses in wood caused by drying. : (Vnutrennie napryazheniya v drevesine pri ee sushke)
- Introduction to finite strain theory for continuum elasto-plasticity
- Introduction to pipe stress analysis
- Introduction to plasticity
- Introduction to stress analysis
- Introduction to the mathematical theory of the stress and strain of elastic solids
- Introduction to the theoretical and experimental analysis of stress and strain
- Investigating core gaps and the development of subcomponent validation methods for wind turbine blades : preprint
- Investigation of TFA in the shear design of hybrid girders
- Investigation of length changes and warping in thin prestressed pavements
- Investigation of length changes in prestressed concrete slabs with outside exposures
- Investigation of stress and crack distribution in concrete slabs containing welded wire reinforcement
- Isodyne stress analysis
- L tectonites
- La investigación de las tensiones elásticas mediante la luz polarizada ...
- Linear elastic fracture mechanics primer
- Live-load stresses in railway bridges : with formulas and tables
- Load carriage in military operations : a review of historical, physiological, biomechanical, and medical aspects
- Load transfer in micropiles for slope stabilization from tests of large-scale physical models
- Local strain redistribution corrections for a simplified inelastic analysis procedure based on an elastic finite-element analysis
- Los metodos informaticos en el diagnostico de edificios antiguos : el acueducto de Segovia
- Low-cycle fatigue and damage mechanics of fiber reinforced concrete under biaxial stress states
- Manual of engineering stress analysis
- Manual on experimental stress analysis
- Mean and tolerance limit stresses and stress modeling for compression perpendicular to grain in hardwood and softwood species
- Mechanical behavior of engineering materials
- Mechanical properties of materials and design
- Mechanics of internal work : (or work of deformation) in elastic bodies and systems in equilibrium, including the method of least work
- Mechanics of material forces
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials : an introduction to the mechanics of elastic and plastic deformation of solids and structural materials, 2
- Mechanics of materials and interfaces : the disturbed state concept
- Mechanics of solids : with applications to thin bodies
- Mechanics of solids with applications to thin bodies
- Mechanics of the girder : a treatise on bridges and roofs, in which the necessary and sufficient weight of the structure is calculated, not assumed ...
- Mehrfeldrahmen : fertige Formeln für Durchlaufrahmen, Hallen- und Stockwerkrahmen, sowie Zahlentafeln für Sonderformen
- Methodology for analysis of stress, creep, and fatigue behavior of compliant mechanisms
- Methodology for design and construction of drilled shafts in cohesive soils
- Micromechanical combined stress analysis : MICSTRAN, a user manual
- Micromechanics of defects in solids
- Microstructural influence on dynamic properties of age hardenable FeMnAl alloys
- Mine-timber studies : stresses in mine-drift timber-sets
- Minimum design loads and associated criteria for buildings and other structures
- Minimum design loads for buildings and other structures
- Minimum design loads for buildings and other structures
- Model study of a folded plate roof
- Modeling and design of explosion-resistant steel stud wall systems
- Modeling and design of explosion-resistant steel stud wall systems
- Modern experimental stress analysis : completing the solution of partially specified problems
- Modern timber engineering
- Modern timber engineering
- Modern timber engineering
- Modulus of elasticity of a rock determined by four different methods
- Mohr circles, stress paths and geotechnics
- Mohr circles, stress paths, and geotechnics
- Moiré analysis of strain
- Moment distribution ; : a rapid method of analysis for rigid-jointed structures
- Moment-rotation behavior of composite and non-composite steel bridge girders in negative bending
- Moving loads on railway underbridges ; : including diagrams of bending moments and shearing forces and tables of equivalent uniform live loads
- Multiple-bolted joints in wood members : a literature review
- Nagra undersökningar rörander skivor och höga balkar av armerad betong
- Nebeneinflüsse bei der Berechnung von Hängebrücken nach der Theorie II. Ordnung. Modellversuche, allgemeine Grundlagen und Anwendung
- Nekonservativnye zadachi teorii uprugoĭ ustoĭchivosti
- Neue Statik der Tragwerke aus Biegesteifen Stäben (Durchlaufträger, Stockwerkrahmen usw.)
- Neuere Methoden zur Statik der Rahmentragwerke und der elastischen Bogenträger, : mit besonderer Berücksichtigung der Anwendung in der Praxis des Beton- und Stahlbetonbaues
- New departure engineering data : analysis of stresses and deflections
- Nonuniform radial loads applied to the boundary of a circular hole in an infinite plate
- Numerical solutions of plates buckling
- On random load analysis
- Papers presented at the V.P.I. Conference on New Developments in Engineering Design, Aug.4-6, 1954
- Performance models for flexural damage in reinforced concrete columns
- Photoelastic investigation of notched corners in square apertures in flat plates subjected to tension
- Photoelastic investigation of the stresses in a capless connecting rod
- Photoelastic studies of crack progagation and crack arrest
- Photoelastic study of an internally stressed circular opening in a biaxial stress field
- Photoelasticity
- Pipe stress engineering
- Piping stress calculations simplified
- Plastic strain accommodation and acoustic emission during melting of embedded indium particles in aluminum
- Plasticity : a mechanics of the plastic state of matter
- Plasticity for mechanical engineers
- Plate-girder construction
- Practical stress analysis in engineering design
- Predicting the plastic deformation of a ratchet pawl assembly using finite element analysis
- Preliminary report on prototype in-situ stress testing for the Yucca Mountain project, Nevada
- Prevention of the failure of metals under repeated stress : a handbook prepared for the Bureau of Aeronautics, Navy Department by the staff of Battelle Memorial Institute, under the auspices of the National Research Council of the National Academy of Sciences
- Principles of economy in the design of metallic bridges
- Principles of experimental stress analysis
- Probleme der Plastizitätstheorie
- Proceedings
- Process vessels subject to explosion risk : design guidelines for the pressure rating of weak process vessels subject to explosion risk
- Qualitative photoelastic stress analysis of dental rootform implants and tooth replicates
- Raft foundations : the soil-line method of design, with worked examples
- Rahmenformeln : gebrauchsfertige Formeln für alle statischen Grössen zu allen praktisch vorkommenden Einfeld-Rahmenformen aus Eisenbeton, Stahl oder Holz
- Rahmenformeln; gebrauchsfertige formeln für alle statischen grössen zu allen praktisch vorkommenden einfeldrahmenformen aus eisenbeton, stahl oder holz--Translation key
- Rating and posting practices for concrete girder bridges
- Rayleigh's principle and its applications to engineering : the theory and practice of the energy method for the approximate determination of critical loads and speeds
- Recent research on mechanical behavior of solids
- Recherche des contraintes dans les poutres de hauteur variable
- Recommended building code requirements for working stresses in building materials. : Report of Building code committee. June 1, 1926 ... Bureau of standards
- Reference stress methods : analysing safety and design
- Relaxation methods in engineering science : a treatise on approximate computation
- Relaxation of wood under constant strain : a study of the visco-elastic property of wood
- Relaxation spectrometry
- Reliability based analysis of contact problems
- Residual stress measurements
- Residual stresses in metals and metal construction
- Residual welding stresses : method for measuring residual stresses and its application to a study of residual welding stresses
- Resolución de vigas armadas
- Response evaluation of channel section cold-formed steel wall-stud members under uniform lateral pressure
- Response of wood-frame houses to lateral loads
- Rheological measurement of a starch suspension as a dilatant fluid
- Rigid frame formulas : explicit formulas of all statistical quantities for those single-panel frames which occur in practical steel, reinforced concrete, and timber constructuion. 114 rigid frame shapes with 1,643 figures. General and special load conditions including temperature changes. Introd. and appendix with load terms and illustrative examples
- Roark's formulas for stress and strain
- Schubfestigkeit und Schubbewehrung der Betonbalken
- Secondary stresses in bridge trusses
- Secondary stresses in bridge trusses : introducing the graphic method of deformation contour and its analytic solution with scientific arrangement of computations
- Serrated wire for welded wire fabric
- Shear strength characteristics of crushed glass
- Simplified design of roof trusses for architects and builders
- Simplified design of roof trusses for architects and builders
- Simplified design of structural timber
- Simplified model for reinforced concrete beams under catenary action
- Slow crack growth and fracture toughness of sapphire for the International Space Station Fluids and Combustion Facility
- Solid mechanics : an introduction
- Solution of elastic-plastic stress analysis problems by the p-version of the finite element method
- Some dynamic creep characteristics of gypsum
- Spannung und Spannungstensor
- Spannungserhöhung am Rande von Löchern
- Stabilité des constructions, résistance des matériaux
- Static and dynamic J-R curve testing of A533B steel using the key curve analysis technique
- Static response evaluation of cold-formed steel stud walls under uniform pressure for blast resistant design
- Statically indeterminate frameworks
- Statics and Strength of Materials for Architecture and Building Construction
- Statics and kinematics of granular materials
- Statics and strength of materials
- Statics and strength of materials for architecture and building construction
- Statik för flygplanskal ; : några metoder för bestämning av kraftflödet i flygplanskal med särskild hänsyn till plana och svagt krökta flygplanskal
- Statistical analysis of the rate of strain tensor in compressible homogeneous turbulence
- Steel structures, stresses in simple structures
- Steel stud retrofit connection development and design
- Strain and stress analysis by holographic and speckle interferometry
- Strain effect in semiconductors : theory and device applications
- Strain facies
- Strain rate and inertial effects on impact loaded single-edge notch bend specimens
- Strain-engineered MOSFETs
- Strength and properties of materials
- Strength and stiffness of large-gap metal-plate wood connections
- Strength of materials
- Strength of materials
- Strength of materials
- Strength of materials : a first course
- Strength of materials : a first course
- Strength of metals under combined stresses ; : a series of educational lectures ... presented to members of the A.S.M. during the twenty-second National Metal Congress and Exposition, Cleveland, Ohio, October 21-25, 1940
- Stress analysis : recent developments in numerical and experimental methods
- Stress analysis and design of elementary structures
- Stress analysis and design of elementary structures
- Stress analysis and optimal design of helical springs with irregular wire cross sections
- Stress analysis for airplane draftsmen
- Stress analysis of polymers
- Stress analysis of safety-related piping
- Stress analysis of structures by joint rotation & deflections
- Stress and deformation : a handbook on tensors in geology
- Stress and strength of manufactured parts
- Stress concentration around circular inserts in cylindrical shells
- Stress concentration around circular inserts in spherical shells
- Stress concentration around holes
- Stress concentration design factors : charts and relations useful in making strength calculations for machine parts and structural elements
- Stress distribution around resin-grouted bolts
- Stress distribution in aeroplane shell constructions : (summary)
- Stress field of the Earth's crust
- Stress in ASME pressure vessels, boiler and nuclear components
- Stress intensity of delamination in a sintered-silver interconnection : preprint
- Stress waves in solids
- Stress waves through projectile joints and interfaces
- Stress, strain, and structural dynamics : an interactive handbook of formulas, solutions, and MATLAB toolboxes
- Stress, strain, and structural dynamics : an interactive handbook of formulas, solutions, and MATLAB toolboxes
- Stress-strain analysis of a [0/90]2s titanium matrix laminate subjected to a generic hypersonic flight profile
- Stress-strain behavior of elastic materials : selected problems of large deformations
- Stresses and deflections in loaded rectangular plates on elastic foundations
- Stresses and displacements induced in rock by tunnel boring machine props
- Stresses and displacements surrounding an open pit in a gravity-loaded rock
- Stresses in a curved beam under loads normal to the plane of its axis
- Stresses in a plate having a relatively small circular hole and loaded parallel to the axis of the hole under various conditions of constraint with an application to deep oil wells
- Stresses in a uniformly loaded circular-arc I-beam
- Stresses in aircraft and shell structures
- Stresses in framed structures
- Stresses in plates and shells
- Stresses in rock outcrops near Atlanta, Ga.
- Stresses in shells of revolution
- Stresses in structural steel angles : with special tables
- Stresses in structures
- Stresses in structures and the accompanying deformations
- Stresses in suspension bridges
- Stresses induced around mine development workings by undercutting and caving, climax molybdenum mine, Colorado (in two parts), 2, Strain and deformation measurement
- Structural analysis
- Structural and stress analysis
- Structural and stress analysis
- Structural bearings
- Structural behavior of cold-formed steel members made of thick sheets and plates
- Structural deflections : a literature and state-of-the-art survey
- Structural design data for concrete drift linings in block caving stopes
- Structural frameworks
- Studien über das elastische Verhalten von Brückengewölben einschliesslich des Zusammenwirkens mit dem Aufbau
- Studies in elastic structures
- Summeneinflusswerte für den einfachen Balken und den symmetrischen Zweifeldträger für Strassembrücken
- Surface modification and mechanisms : friction, stress and reaction engineering
- Surface structures in building : structure and form
- Symposium on determination of elastic constants : presented at the fifty-fifth annual meeting (fiftieth anniversary meeting) American Society for Testing Materials, New York, N.Y., June 25, 1952
- Symposium on fatigue of aircraft structures : presented at the third Pacific area national meeting, San Francisco, Calif., October 14-15, 1959
- Symposium on fatigue of aircraft structures : presented at the third Pacific area national meeting, San Francisco, Calif., October 14-15, 1959
- Tensile failure during structural development of single-layer buckle folds
- The Influence of precompression on the lower-bound initiation toughness of A 533 B reactor-grade steel
- The Stress analysis of pressure vessels and pressure vessel components
- The William M. Murray lectures, 1953-1967 : a collection of prestige lectures presented at national meetings of the SESA
- The Winslow tables. : Diagrams for calculating the strength of wood, steel, and cast-iron beams and columns
- The analogy between elastic solids and viscous fluids
- The analysis of stresses and design of multiple-arch dam
- The behavior of rocks and rock masses in relation to military geology
- The boundary integral equation method in axisymmetric stress analysis problems
- The calculations for steel-frame structures : designed to comply with the requirements of the London county council (General powers) act, 1909, with notes on the application of theory to practical design
- The closure of thin wall pressure vessels
- The construction of influence lines with a mechanical interferometer
- The development of conical stress forms by explosive charges
- The dynamics of particles and of rigid, elastic, and fluid bodies : being lectures on mathematical physics
- The dynamics of particles and of rigid, elastic, and fluid bodies. : Being lectures on mathematical physics
- The effect of combined torsional and bending loads on a channel beam with one end restrained from warping
- The effect of overstrain on closely coiled helical springs : and the variation of the number of active coils with load
- The effect of stress on hydrogen uptake and desorption by A-286
- The effects of compressive preloads on the compression-after-impact strength of carbon/epoxy
- The failure criteria and deformational moduli of granular rock
- The fracture of metals : a report to the Bureau of Ships, U.S. Navy
- The graphic method by influence lines for bridge and roof computations
- The magnitude and directions of strains and stresses in edge loaded concrete slabs
- The measurement of stress and strain in solids : based on the proceedings of a conference arranged by the Manchester and District Branch of the Institute of Physics on 11, 12 and 13 July 1946
- The mechanical properties of mine rocks and a standardized test procedure for their determination
- The modulus of elasticity of shear
- The p-version of the finite element method in incremental elasto-plastic analysis
- The place of photoelasticity in the analysis of statically indeterminate structures
- The plastic flow of metals
- The stability of rectangular plates with built-in supports at the edges
- The statically-indeterminate stresses in frames commonly used for bridges
- The theoretical behavior of an inelastic material model
- The theory for the bending of rectangular beams : including the effects of shear and normal pressure
- The theory of limit design as applied to column analysis
- The theory of strains in girders and similar structures : with observations of the application of theory to practice, and tables of the strength and other properties of materials
- The theory of structures
- Theorie des gleichgewichtes elastischer systeme und deren anwendung
- Theory and practice of modern framed structures, designed for the use of schools and for engineers in professional practice
- Theory of elastic stability
- Theory of elastic stability
- Theory of elastic stability
- Theory of elasticity
- Theory of elasticity
- Theory of elasticity
- Theory of elasticity
- Theory of flow and fracture of solids
- Theory of inelastic structures
- Theory of limit design
- Theory of notch stresses : principles for exact stress calculation
- Theory of plates and shells
- Theory of statically indeterminate structures
- Theory of transverse strains and its application in the construction of buildings : including a full discussion of the theory and construction of floor beams, girders, headers, carriage beams, bridging, rolled-iron beams ... and roof trusses; with tables ... / | by R. G. Hatfield
- Thermal stress and strain generation in heat treatment
- Thermal stresses and movements in bridges
- Thermal stresses in circular plates including the effect of transverse shear deformation
- Thermomechanical deformation behavior of a dynamic strain aging alloy, Hastelloy X
- Timber engineers' handbook
- Torque-stress relations in bolts with National Fine threads
- Transient creep of repository rocks, final report : mechanistic creep laws for rock salt
- Triaxial method for determining the elastic constants of stress relief cores
- Trusses and arches analyzed and discussed by graphical methods
- Trusses of wood and iron : practical applications of science in determining the stresses, breaking weights, safe loads. scantlings, and details of construction, with complete working drawings
- Two-dimensional surface strain measurement based on a variation of Yamaguchi's laser-speckle strain gauge
- Two-point bend studies of glass fibers
- Ueber den zusammenhang der biegungs-elastizität des Gusseisens mit seiner zug- und druckelastizität
- Ultimate limit state of concrete girders prestressed with unbonded tendons
- Underlying modal data issues for detecting damage in truss structures
- Uplift in gravity dams : calculation methods, experiments and design theories
- Verfahren der Spannungsoptik
- Weight functions and stress intensity factor solutions
- Wind stresses in tall buildings : a comparative analysis
- Working stresses
- X-ray based displacement measurement for hostile environments
- Étude de la déformation et de la rupture des matières plastiques
- Étude du choc d'un mobile très dur à bout sphérique sur une plaque épaisse de métal mou : résistance électrique du contact par choc
- Étude expérimentale des "voilures équilibrées."
- Über die Stabilität des Gleichgewichtes und die Knickfestigkeit eines räumlichen Gittermastes
- Über die berechnung statisch ungestimmter auslegerbrücken

## Embed

### Settings

Select options that apply then copy and paste the RDF/HTML data fragment to include in your application

Embed this data in a secure (HTTPS) page:

Layout options:

Include data citation:

<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.missouri.edu/resource/nmyWYDhAW9I/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.missouri.edu/resource/nmyWYDhAW9I/">Strains and stresses</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.missouri.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.missouri.edu/">University of Missouri Libraries</a></span></span></span></span></div>

Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements

### Preview

## Cite Data - Experimental

### Data Citation of the Concept Strains and stresses

Copy and paste the following RDF/HTML data fragment to cite this resource

`<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.missouri.edu/resource/nmyWYDhAW9I/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.missouri.edu/resource/nmyWYDhAW9I/">Strains and stresses</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.missouri.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.missouri.edu/">University of Missouri Libraries</a></span></span></span></span></div>`