#
Stress analysis
Resource Information
The concept ** Stress analysis** represents the subject, aboutness, idea or notion of resources found in **University of Missouri Libraries**.

The Resource
Stress analysis
Resource Information

The concept

**Stress analysis**represents the subject, aboutness, idea or notion of resources found in**University of Missouri Libraries**.- Label
- Stress analysis

- Source
- nasat

## Context

Context of Stress analysis#### Subject of

No resources found

No enriched resources found

- ZIP2DL, an elastic-plastic, large-rotation finite-element stress analysis and crack-growth simulation program
- A fan design that meets the NASA aeronautics noise goals
- A near-wall Reynolds-stress closure without wall normals : under grant NAG1-1772
- A realizable Reynolds stress algebraic equation model
- A study on strength evaluations of EDNi/EDCu/NARloy-Z bonded joints
- Advanced modeling strategies for the analysis of tile-reinforced composite armor
- Advances in fatigue and fracture mechanics analyses for metallic aircraft structures
- Advances in fatigue and fracture mechanics analyses for metallic aircraft structures
- Blade tip rubbing stress prediction : final report
- Burner liner thermal/structural load modeling
- Center for Computational Structures Technology : semi-annual report
- Comparison of two computer codes for crack growth analysis : NASCRAC versus NASA/FLAGRO
- Completed Beltrami-Michell formulation for analyzing radially symmetrical bodies
- Composite structures damage tolerance analysis methodologies
- Computational methods for structural mechanics and dynamics : proceedings of a workshop sponsored by the National Aeronautics and Space Administration and held at NASA Langley Research Center, Hampton, Virginia, June 19-21, 1985
- Cost Optimization Software for Transport Aircraft Design Evaluation (COSTADE) : overview
- Deformation and life analysis of composite flywheel disk and multi-disk systems
- Deformation and life analysis of composite flywheel disk and multi-disk systems
- Delamination stresses in semicircular laminated composite bars
- Design evaluation using finite element analysis of cooled silicon nitride plates for a turbine blade application
- Design evaluation using finite element analysis of cooled silicon nitride plates for a turbine blade application
- Design, generation and tooth contact analysis (TCA) of asymmetric face gear drive with modified geometry
- Determination of residual stress in composite materials using ultrasonic waves : NASA contract # NAG3-1716
- Determination of stress coefficient terms in cracked solids for monoclinic materials with plane symmetry at x3=0
- Determination of stress intensity factor distributions for "interface" cracks in incompressible, dissimilar materials : summary report : reporting period - 8/15/94 - 12/31/97 : grant no. NAG-1-1622-Supl. 1-5*
- Development of methodologies for the estimation of thermal properties associated with aerospace vehicles : NASA grant no. NAG-1-1507, May 1, 1993 - March 31, 1966 : a final report
- Dynamic analysis with stress mode animation by the integrated force method
- Dynamic analysis with stress mode animation by the integrated force method
- Dynamical system analysis of Reynolds stress closure equations
- Earth Observing System (EOS)/Advanced Microwave Sounding Unit-A (AMSU-A), stress analysis report, A1 module : contract no. NAS5-32314
- Effect of flange bolt preload on space shuttle main engine high pressure oxidizer turbopump housing analysis
- Effect of interference on roller-bearing fatigue life
- Effect of load rate on ultimate tensile strength of ceramic matrix composites at elevated temperatures
- Effect of stress concentrations in composite structures : progress report
- Effects of fiber content on mechanical properties of CVD SiC fiber-reinforced strontium aluminosilicate glass-ceramic composites
- Effects of fiber content on mechanical properties of CVD SiC fiber-reinforced strontium aluminosilicate glass-ceramic composites
- Elastic response of (001)-oriented PWA 1480 single crystal : the influence of secondary orientation
- Final report for ETP-0492, measured residual stresses in CYL S/N 53 fretted area : contract no. NAS8-38100
- Final report for ETP-0492, measured residual stresses in CYL S/N 53 fretted area : contract no. NAS8-38100
- Finite element analysis of a NASA National Transonic Facility wind tunnel balance
- Finite element analysis of a NASA National Transonic Facility wind tunnel balance
- HITEMP material and structural optimization technology transfer : [final report]
- In-plane and interlaminar shear strength of a unidirectional Hi-Nicalon fiber-reinforced celsian matrix composite
- In-plane and interlaminar shear strength of a unidirectional hi-nicalon fiber-reinforced celsian matrix composite
- Influence of cooling hole geometry and material conductivity on the thermal response of cooled silicon nitride plate
- Integrated Advanced Microwave Sounding Unit A-2 (AMSU-A2), EOS stress analysis report : contract no. NAS5-32314
- Integrated Advanced Microwave Sounding Unit-A (AMSU-A) : METOP stress analysis report (qual level random vibration), A1 module : contract no. NAS 5-32314
- Integrated Advanced Microwave Sounding Unit-A (AMSU-A) : METSAT stress analysis report, A2 module
- Low gravity experiment for studying rotating fluid having a free surface
- Low noise research fan stage design
- MEGA16 : computer program for analysis and extrapolation of stress-rupture data
- Meshing of a spiral bevel gearset with 3D finite element analysis
- Meteorological Satellites (METSAT) and Earth Observing System (EOS), Advanced Microwave Sounding Unit-A (AMSU-A) : stress analysis report : contract no. NAS 5-32314
- Meteorological Satellites (METSAT) and Earth Observing System (EOS), Advanced Microwave Sounding Unit-A (AMSU-A) : stress analysis report : contract no. NAS 5-32314
- Methodology for predicting the onset of widespread fatigue damage in lap-splice joints
- Methodology for predicting the onset of widespread fatigue damage in lap-splice joints
- Micromechanical characterization of nonlinear behavior of advanced polymer matrix composites
- Micromechanics analysis of space simulated thermal deformations and stresses in continuous fiber reinforced composites
- Micromechanics for particulate reinforced composites
- Micromechanics for particulate reinforced composites
- Model development in viscoplastic ratchetting
- Multilayer theory for delamination analysis of a composite curved bar subjected to end forces and end moments
- New geometry of worm face gear drives with conical and cylindrical worms : generation, simulation of meshing, and stress analysis
- Nonlinear mesomechanics of composites with periodic microstructure : final report on NASA NAG3-882
- Plate and butt-weld stresses beyond elastic limit, material and structural modeling
- Practices in adequate structural design
- Practices in adequate structural design
- Predicting bone mechanical properties of cancellous bone from DXA, MRI, and fractal dimensional measurements : final report, TMC-NASA collaborative research project
- Predicting nonInertial effects with algebraic stress models which account for dissipation rate anisotropies
- Probabilistic analysis for comparing fatigue data based on Johnson-Weibull parameters
- Profiled roller stress/fatigue life analysis methodology and establishment of an appropriate stress/life exponent : results summary
- Quantification of processing effects on filament wound pressure vessels
- Quantifying residual stresses by means of thermoelastic stress analysis
- Quantifying residual stresses by means of thermoelastic stress analysis
- SRM internal flow test and computational fluid dynamic analyses : final report : contract NAS8-39095
- Simulated bladed MMC disk LCF validation : draft final report
- Skin/stiffener interface stresses in composite stiffened panels
- Specimen designs for testing advanced aeropropulsion materials under in-plane biaxial loading
- Star 48 solid rocket motor nozzle analyses and instrumented firings
- Stress analysis and fracture in nanolaminate composites
- Stress analysis of B-52 pylon hooks for carrying the X-38 drop test vehicle
- Stress decay in an orthotropic half-plane under self-equilibrating sinusoidal loading
- Stress-intensity factor equations for cracks in three-dimensional finite bodies subjected to tension and bending loads
- Structural analysis of composite flywheels : an integrated NDE and FEM approach
- Structural analysis of composite flywheels : an integrated NDE and FEM approach
- TP-H1148 knitline integrity evaluation : final report
- Testing and implementation of advanced Reynolds stress models : final technical report, contract no. NAG1-1712, duration of effort: March 1995 - March 1997
- Testing for random limit load versus static limit load
- Testing for random limit load versus static limit load
- The Computational Structural Mechanics Testbed data library description
- Thermal behavior of a titanium honeycomb-core sandwich panel
- Thermal stresses in coatings on carbon-carbon composites
- Thermoelastic stress analysis : the mean stress effect in metallic alloys
- Thermoelastic stress analysis : the mean stress effect in metallic alloys
- Thermostructural analysis of unconventional wing structures of a Hyper-X hypersonic flight research vehicle for the Mach 7 mission
- Time/temperature dependent tensile strength of SiC and Al2O3-based fibers
- Time/temperature dependent tensile strength of SiC and Al2O3-based fibers
- Transverse vibration and buckling of a cantilevered beam with tip body under constant axial base acceleration
- UNIX-based operating systems robustness evaluation
- User's manual for GAMNAS--Geometric and material nonlinear analysis of structures
- Verification of orthogrid finite element modeling techniques
- Wing weight optimization under aeroelastic loads subject to stress constraints
- ZIP2DL, an elastic-plastic, large-rotation finite-element stress analysis and crack-growth simulation program

## Embed

### Settings

Select options that apply then copy and paste the RDF/HTML data fragment to include in your application

Embed this data in a secure (HTTPS) page:

Layout options:

Include data citation:

<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.missouri.edu/resource/ooxyVifby08/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.missouri.edu/resource/ooxyVifby08/">Stress analysis</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.missouri.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.missouri.edu/">University of Missouri Libraries</a></span></span></span></span></div>

Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements

### Preview

## Cite Data - Experimental

### Data Citation of the Concept Stress analysis

Copy and paste the following RDF/HTML data fragment to cite this resource

`<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.library.missouri.edu/resource/ooxyVifby08/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.library.missouri.edu/resource/ooxyVifby08/">Stress analysis</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.library.missouri.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.library.missouri.edu/">University of Missouri Libraries</a></span></span></span></span></div>`